Watching The Dvd; Preparation; Turning On The Power; Select The Dvd Mode - Sharp LC-32DV22U Operation Manual

Watching the DVD
Simple operations for watching a DVD.
_-PLAY =STOF _SKIP_ REJECT /
00000
- vo_ 4 v cH _ I_PUT POWER
CZD CZD 0 i_
POWER
SHARP
POWER indicator
TV/DVD status indicator (POWER)
"O_-FNF/standby ::::::_: {(_:d:n) i
Preparation
Perform the following steps before you press POWER
on the remote control unit.
1. Insert the batteries into the remote control unit.
(See page 9.)
2. Plug in the AC cord to the AC outlet. (See page 8.)
Turning on the power
Press POWER on the TV/DVD, or POWER on the
remote control.
POWER indicator (Green): The TV/DVD is on.
("PLEASE WATT" will appear for a few seconds on the
screen.)
Select the OVO mode
Press TV/DVD to select the DVD mode.
Turning off the power
Press POWER on the TV/DVD, or POWER on the
remote control.
The TV/DVD enters standby mode and the image on the
screen disappears.
The POWER indicator on the TV/DVD changes to Red.
POWER (On/Standby)
If you are not going to use this TV/DVD for a long period
of time, be sure to remove the AC cord from the power
outlet.
Weak electric power is still consumed even when POWER
is turned off.
CD CD CD
®@@
®®®
}
®®®
SUBTITLE MUTE
®@©
} SKiP REV FWD SKIP
STILL/PAUSE PLAY STOP
CSD C_ C?K)
} DVD MENU SETUP/TVMENU
s
{_)- 36