Digital Zoom; Shutter Speed - Sanyo Xacti VPC-FH1 Instruction Manual

Exposure control
type
Light-measuring
mode
Range
Digital zoom
Shutter speed
Sensitivity
Programmable AE/Shutter speed priority AE/
Aperture priority AE/Manual exposure control
Exposure compensation available from the Shooting
Setting Screen (0
+1.8 EV in 0.3 EV steps)
Multi-section measuring, center-weighted
measuring, spot measuring
Normal mode:
50 cm (19.69 in.) to infinity
Super macro mode:
1 cm (0.39 in.) to 1 m (3.28 ft.) (Wide end only)
For shooting:
lx to approx. 10x
For playback:
lx to 62.5x (varies with resolution)
Still image shooting mode: 1/2 to 1/1,000 sec.
(Maximum approx. 4 seconds when scene select
function set to lamp _)
(During flash: 1/30 to 1/1,000 sec.)
Sequential shots mode: 1/15 to 1/1,000 sec. (no
flash)
Video clip recording mode: 1/30 to 1/10,000 sec.
(1/15 sec. max.: when scene select function is set
to the lamp _ high sensitivity mode)
Still image shooting (standard output sensitivity*)/
video clip recording mode:
Auto (video clip recording: ISO 50 to 800; still
image shooting: ISO 50 to 200)/ISO 50, ISO 100,
ISO 200, ISO 400, ISO 800, ISO 1600, and
ISO 3200 (switchable from Shooting Setting
Screen)
• Sensitivity measured in compliance with the
ISO standard (ISO 12232:2006).
• Maximum ISO sensitivity up to 1600 equivalent
when Scene Select function is set to _.
• Recorded at ISO 1600 in the video clip
recording mode, even if ISO sensitivity setting
Ill
English 176