Table of Contents
Advertisement
Connections to other equipment
To connect the LCD TV to a DTV receiver/set-top
box
If you connect a DTV receiver/set-top box, connect your LCD TV to a DTV receiver/set-top box using a
component video cord.
Left side of the LCD TV
I
ToAV2AUDIO(L/R)
IN
(_
_1)_ ('-O) !
_
Audio cord (not supplied)
_'_
_
__D
Component video cord
I
(not supplied)
To COMPONENT IN
To Audio OUT
PR
TO Component
OUT
o0o0
To connect the LCD TV to an HDMI or a DVI device
The HDMI input receives digital audio and uncompressed
video from an HDMI device or uncompressed
digital
video from a DVI device.
When you connect to a DVI device with an HDMI-to-DVI adapter cable, it transfers only the video signal.
Separate analog audio cords are required.
Left side of the LCD TV
B
I
To HDMI_r31)
To HDMI out
HDMI cable (type A connector)
r._
I
I
(not supplied)
HDMI device
I
To HDMI-1
©
@
or
HDMI - to - DVI adapter cable
(HDMI type A connector)
I
1
(not supplied)
J Audio cord (not supplied)
__
To DVI output
To PC/HDMI-1 AUDIO IN
DVI device
NOTE:
• When you connect a DVI device, you must connect only with HDMI-1.
When using HDMI-1 to connect your HDMI or DVI devices, you must select the corresponding
audio
input source (HDMI or DVI) on the menu screen (see "Selecting
the HDMI audio input source" on
page 26). Otherwise you will only see the image with no sound.
• If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable
or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To
receive the picture you must change the output resolution on the external component.
Should you require further instruction, please contact the manufacturer of the external component.
14
Advertisement
Table of Contents
