Adjusting The Screen Quality - Samsung LTP227W Owner's Instructions Manual

I PC DISPLAY
I
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by fine tuning alone, then do the frequency adjustments to
the utmost and fine tune again. After the noise has been reduced, re-adjust the picture
so that it is aligned on the center of screen.
Press tile PC button on the remote control to select tile PC mode.
Press the MENU button
to display the menu.
Press the
UP/DOWN Av
buttons to selec[
"Setup", then press the
ENTER_ button.
2
Press the
UP/DOWN A'r
buttons to select
"PC Setup", then press
the ENTER_ button.
Press the
PC rc_p
I
............. Pc p_s{ton •
, _ Dv s_ ec DVlA_ _ _ I
I
ENTERs, buKon to
select "Image Lock".
then press the
ENTERr2_ but[on.
3
Press the
UP/DOWN ,&v
buttons to select
"Coarse or Fine"
then press the
ENTERr_ button.
Press the
LEFT/RIGHT _ P" co_ I rl i so
buttons to adjust the
screen quahty, vertical "
<Adjusting Coarse>
stnpes may appear or ,
the 3icture may be I
blurry. F_ i rl i s2
I
<Adjusting Fine>
4
When you are satisfied with the settings, press the
MENU button repeatedly to return to normal wewmg
English-51