Cleaning The Debris Filter - Samsung WF435ATGJWR/A1-0002 User Manual

CLEANING THE DEBRIS FILTER
We recommend cleaning the debris filter when ,Hater does not drain well or the "nd" error message is dispJayed.
1. Open the filter cover by pressing and pulling the handle
of the filter cover with your finger.
2. Holding the drain cap, pull the drain tube that
Step 1
is hooked on the guide hook to the front.Do
not pull the drain tube with excessive force.
3. Place a bowl under the washing machine
to catch any remaining water. Then, hold
the drain tube with one hand, and turn the
emergency drain cap counter clockwise with
the other hand to separate it from the drain
tube.
4. Drain the remaining water completely.
Step 2
5. Pull out the debris cap and debris filter assembly.
6. Wash any dirt or other material from the
debris filter. Make sure the drain pump
propeller behind the debris filter is not
blocked.
Debris filter ca
/,
Debr s f ter
',.J ,---IDebris filter
cap
7. When you have finished cleaning the filter, insert the debris
cap and filter assembly back into the washer. Turn the
debris filter cap clockwise until the indicator on the debris
filter cap is in the 12 o'clock position, pointing to the
indicator on the washer.
8. Re-attach the emergency drain cap to the drain tube, and
then hook the tube to the hook guide.
9. Re-install the filter cover the filter cover.
WF435A-03159B EN 20120619.mdd Sec4:33
maintaining your washer 33
2012-06-19 Z-8:16:53
I