Setting Up Your Remote Control - Samsung LT-P266W Owner's Instructions Manual

Setting Up Your Remote Control
After it has been set up properly, your remote con/rol can operate in five difl_rent modes:
TV, VCR, Cable, DVD or Samsung Set-top box. Pressing tile corresponding button on tile
remote control allows you to switch between these modes, and control whichever piece of
equipment you choose.
Note
The remote control might not be compatible with al! DVD Players, VCRs and Cable boxes.
This remote control is only compatible with Samsung Set-top boxes.
Setting Up the Remote to Operate Your VCR
1 Turn oH your VCR.
2
Press the MODE button and make sure that the VCR LED
is illuminated.
3 Press the SET button on your rl'v's remote control.
4 Using the number buttons on
yotlr
re,note contro], enter
three digits of the VCR code listed on ptge 20 of this
manual R_r yore brand of VCR. Make sure you enter three
digits of the code, even if the first digit is a "0".
(If more than one code is listed, try the first one.)
Press the Power button on the remote control. Your VCR
should tmn on il your remote is set up correctly.
If you*" VCR does *lot turn on after set up, repeat steps
2, 3, and 4_ but tU one of the other codes listed for yore
brmd of VCR. If no othel codes are listed, tiy each VCR
code. 000 through 088.
Note on Using Remote Control Modes: VCR
When your remote control is in "VCR" mode, the volume buttons still control your TV's volume,
English- 1 7