Samsung UN60ES8000 E-Manual
Hide thumbs
Also See for UN60ES8000:
- E-manual (122 pages) ,
- Quick manual (3 pages) ,
- User manual (609 pages)
Related Manuals for Samsung UN60ES8000
Summary of Contents for Samsung UN60ES8000
- Page 1 E -MANUAL Thank you for purchasin9 this Samsuno oroquc_. To recewe more complete service, please register your product at www.samsung.com/register Vlodel Serial No.
- Page 2 Connecting to the Network Network Connection There are three ways to attach your TV to your LAN cable: using want illustration_ If you user°s manual° connection illustrated in your user ° manual° - You can attach TV to your your LAN by connecting the LAN port on the back of your TV to an external...
- Page 3 modem using a LAN cable. - You can attach your TV to your LAN by connecting the LAN port on the back of your TV to an IP Sharer which is connected to an external modem. Use LAN cable for the connection.
- Page 4 of your TV directly to a network wall outlet using a LAN cable. Note that the wall outlet is attached to a modem or router elsewhere in your house. requires Dynamic If your should use an ADSL IP address, modem that supports Host Dynamic...
- Page 5 address, subnet mask, values ewax needs access the Inte_net ente_ them manually° ho_e networks Dynamic IR address° Static netwo_ks require address° requires Static IR address, IR address, and DNS values manually when...
- Page 6 connection° get the address, gatewax values, contact Internet Service Provider (ISP/o have Windows purer, you also get these values through co_putero ADSL modems that DHCP IP address° ADSL requires modems that DHCP also...
- Page 7 Static addresses° Network Connection want illustration, use_°s manual° connection illustrated in your user ° manual° You can connect TV to your your through a standard wireless router or modem. This TV supports the IEEE 802.11a/b/g and n communication protocols.
- Page 8 Samsung recommends using IEEE 802.11n. When play video over network connection, the video may not play smoothly. a wi connected sharer youtey oy If the wi ess IP sharer suppor DHCP or ' youy static IP address to connect wireless...
- Page 9 channel sha_e_ that currently being channel fo_ _ the used° being wireless sha_e_ by anothe_ device nea_bx this will result munication failure° only the following wireless security ©_otocols::::: Authentication Mode :WEP, WPAPSK, WPA2PSK...
- Page 10 - Encryption Type :WEP, TKIP, AES If you High- throughput (G_eenfield/802oSSn mode Enc_y set to TIIII_IPon your wireless route_, Sa_sung TVs will suppo_t connection in co pliance Wi-Fi ce_tific cific iOnSo If your wireless route_...
- Page 11 connect to the netwo_k /Push Configuration) Identification Numbe_}o WPS will automatically configure SSID and mode° If your route_; modem, device connect the TVo Connection Methods::::: the wi ess netwo_k connection...
- Page 12 - Auto Setup the Auto {Using Network Search function) - Manual Setup - wps(psc} - Pug Access...
- Page 13 Setting up the Wired Network o_k Settings Menu -_ Net o_k -_ Settings Set the wired or wireless network connection to use various Internet services such as Smart Hub, A Sha_e and perform software upgrades. Wired You can configure your TV's wired network connection automatically...
- Page 14 supports DHCP. connecting pop_up appears dir_ectly set wir_ed networ_ko TV_s wired connection auto aticallX follow these 1. Go to the Settings screen. Settings) 2. Select Start. The network test screen appears and verifies the network...
- Page 15 connection. 3. When the connection has been verified, connected to the /nte;-net_ /f p_"obbms have any using onine pease contact Inter-net message appears. If the connection port connection° If the cannot find networ_k connection values or _...
- Page 16 to set the connection if you manuallx go to section_ °'Manual Setup° °' Manual Wired You can configure your TV's wired network connection manually when that connecting your TV to a network requires a Static IP address. get the address, gatewax values, contact...
- Page 17 TV°s wired connection anuallX follow these 1. Go to the Settings screen. Settings) 2. Select Sta_¢. The network connection screen appears and the verification process starts. 3. Select The verification process stops. Select Settings on network connection screen. The/P Settings...
- Page 18 screen appears. 4. Select the/P Setting, and then set the/P Setting to Ente;- msnus 5. Go to the/P Add_ess entry field, and then select the/P Add_ess using remote. 6. Enter the first portion of the/P (for example, 105) into the first entry field using your remote.
- Page 19 When done, go to the next field. 8. Repeat the entry process for each field in the/P Addt_ess. istake when make entering number, re-enter number 9. When done, go to the Subnet fields. 10. Repeat the same entry process for Subnet...
- Page 20 11.When done, select network test screen appears verification process starts. When connection been verified, the/nte_ have any ©_"ob/ems using online se_vices_ pease contact /nte_net Sewice R_ovide;s_message appears. o_k Status Menu -_ Net o_k -_...
- Page 21 You can check the current network Internet status. When the connection failed°°° • No network cable found, Check that your network cable is plugged in. If it is connected, make sure that the router is turned on; if it is on, try turning if off and on again.
- Page 22 manually by selecting /P Settings. - Ensure DHCP server is enabled re-plug-in router and unplug Internet Service router. - Contact your Provider for more information. Unable to connect to the network, ® Try the following: check if your address is set correctly in /P Settings.
- Page 23 cannot connect to the Internet, Check the DNS settings in /P Settings, or contact your Internet Service Provider to access the Internet. . Network setup complete, but cannot connect to the Internet. Contact your Internet Service Provider to access the Internet.
- Page 24 Setting up the Wireless Network o_k Settings Menu -_ Net o_k -_ Settings Set the wired or wireless network connection to use various Internet services such as Smart Hub, A Sha_e and perform software upgrades. Wireless Setup Most wireless networks have an optional security...
- Page 25 transmit an encrypted security code called an Access or Security Key. The Security Key is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified length you were asked to enter when you set wireless wireless security...
- Page 26 you will have to enter the Pass Phrase during the automatic or manual setup process. TV_s wireless connection auto aticallX follow these 1. Go to the Settings screen. Settings) 2. Select Sts_¢. The network function searches for available wireless networks. When done, it displays...
- Page 27 list of the available networks. 3. in the list of networks, sebct network you want to connect, then sebct Next. If the wi ess router set to Hidden (Invisible/_ hsv@ o;_k and /SS D/ Security IIIl_oy to establish connection° 4. if the Enter security key screen...
- Page 28 appears, go to step 5. If you select a wireless router that does not have wireless security, go to step 7. 5. To set wireless security for the router, enter the Security Key (Security or PIN). enter the Security (Security PIN/using keyboard screen°...
- Page 29 Pass on one of the used to scFeens up your router or modem° The network 6. When done, select connection screen appears and the verification process starts. 7. When the connection has been verified, connected to the /nte_net_ /f you have any p;_ob/ems using onine pease...
- Page 30 appears. message If the does accept Security IIIIi(ey{Security PIN}, /P Settings enter the settings manually° set up the connection If you want manuallx /P Settings° Then, _'Manual Setup_o Manual Wireless Network You can configure your TV's wireless...
- Page 31 network connection manually when connecting your TV to a network that requires a Static IP address or if the automatic connection process has failed. address, gatewax values, contact Intern Rrovide_ (ISR TV°s wireless connection anuallX follow these...
- Page 32 1. Go to the Settings screen. Settings) 2. Select Start. The network function searches for available wireless networks. When done, it displays list of the available networks. 3. In the list of networks, select a network you want to connect, then select Next.
- Page 33 o_k and /SS D/ Security IIIl_oy to es blish connection° 4. if the Enter security key screen appears, go to step 5. if you select a wireless router that does not have wireless security, go to step 7. 5. To set wireless security for the router, enter the Security Key (Security...
- Page 34 can ente_ the /Security PIN} using keyboard Security IIIl_oy using your _' should to find on one of the used to scFeens up your router or modem° The network 6. When done, select and the connection screen appears verification process starts.
- Page 35 7. Select Stop. verification process stops. Select/P Settings network connection screen. Settings screen appears. Select/P Setting, then the/P Setting Ente_ _ manually: 9. Go to the/P Add_ess entry field, and then select the/P using remote. 10. Enter the first portion of the Add_ess (for example, 105) into the...
- Page 36 first entry field using your remote. When done, the next field. go to 11. Enter the next portion of the/P When done, go to the next field. 12. Repeat the entry process for each field in the/P Add_ess. istake when make entering number,...
- Page 37 fields. 14. Repeat the same entry process for Subnet 15.When done, select OK. The network connection screen appears and the verification process starts. When the connection has been verified, to the/nte_net have any p_ob/ems using online se;_vices_ pease contact /nte;_net...
- Page 38 P__ovide;-:,message appears. Se_vice WPS(PBC) Network Setup if your router has a WPS(PBC) button, you can configure your TV's wireless network connection using the WPS(PBC) button more easily. TV°s wireless follow connection using WPS(PBC 1. Go to Net o_k Settings screen. Settings)
- Page 39 2. Select Start. network function searches for available wireless networks. When done, it displays list of the available networks. 3. Select the WPS PBC 4. Press the WPS(PBC) button on your router within 2 minutes. Your TV automatically acquires all the network setting values it needs and connects...
- Page 40 Access Network Setup The Pug & Access function lets you easily connect your Samsung TV to your Samsung wireless router (sold separately) by using a USB memory stick to transfer the setup information from the router to the TV. If your...
- Page 41 Pug & Access on sUngoCO_o TV°s wireless follow connection using Plug 1. Turn on the Samsung wirebss router and your TV. 2. Insert a USB memory stick into the USB port in your Samsung wireless...
- Page 42 (Blinking -_ on). 3. Take the USB memory stick out of the router, and then insert it into a USB port on your Samsung TV. The memory stick downloads connection information. 4. Wait until the connection automatically established.
- Page 43 screen appea_s on the of the failU_eo screen notifying If you to try using Access again, disconnect the USB stick, reset the AP, and again Step So also one of the othe_ connection methods° 5. The network connection screen appears, and the network setup done.
- Page 44 6. Place the wireless router in a desired location. If the wi ess router's settings change or _you install new wireless router, procedure again, beginning fro_ Step 1o o_k Status Menu -_ Net o_k -_ You can check the current network...
- Page 45 Internet status. When the wireless connection failed°°° • Wireless network connection failed, No wireless router selected. Go to router. Settings to select your Unable to connect to wireless router. Try the following: check that the router is turned on, and if it is try turning off and on again.
- Page 46 IP auto setting failed, ® Try the following to set your IP address automatically. Or set your IP address manually by selecting /P S®tti_gs. - Ensure DHCP server is enabled on router and unplug and re-plug-in router. - Contact your Internet Service Provider for more information.
- Page 47 Contact your Internet Service Provider for more information. Connected to your local network, but ® cannot connect to the Internet. Check the DNS settings in /P .._,_0'_".'-",_" or contact your Internet Service Provider to access the Internet. Network setup complete, but cannot ®...
- Page 48 Managing the Network Connected Devices Wi_.Fi Menu -_ Net o_k -_ Wi_-Fi Direct Set to connect the TV to wireless mobile devices. Using this function, can connect wireless mobile devices with your TV directly without a router. use this function_ your mobile device should...
- Page 49 TV using Wi_Fi follow 1. Go to Wi_-Fi Direct screen -_ Wi_-Fi Direct). The TV starts search devices. 2. Turn on the Wi-Fi Direct function your device. Select the desired Wi-Fi device. - PBC: Press the WPS(PBC) button on your Wi-Fi device within minutes.
- Page 50 acquires network setting values needs connects your network. - P/N: input the displayed PiN on your device. want to disconnect the device_ If you the connected Wi ....Fi device_ and then Soft AP Menu -_ Net o_k -_ Using this function, you can connect...
- Page 51 the TV on your mobile devices if your mobib devices do not support Wi_-Fi Direct. Set the options for connection of Wi-Fi device. Soft AP Turns on or off the When Soft AP is set to your mobile devices can find the TV name in Wi-Fi connection list.
- Page 52 remote control. security does meet is not required digit number, available. Input the generated security key into the device you want to connect. - If network does not operate normally, check the security key again. incorrect security key may cause a malfunction.
- Page 53 Menu -_ Net o_k -_ A Sha_e Settings Selects whether to use media functions on the network. For details on set up options, refer to the "AllShare Settings" in the A Sha_e section. Nsm@ Menu -_ Net o_k -_ Device Enter a name for this TV.
- Page 54 your TV manually using your control° Fo__ example, if you want cBange sung eacB cBa_acte_ using your ,j remote° done, Done°...
- Page 55 Setting the Time Time -_ Tim® TIIIIq e t i _ e set will appear wllllq INFO button or select/nfo ® Set the clock to use the various timer features of the TV. disconnect have the clock again°...
- Page 56 clock_ follow steps: 1. Go to Cock screen (System -_ Time -_ Cock). 2. Select or Manus. Auto: The TV will automatically download the correct time from a digital channel. - Select Time and then select your Time Zone. - Select (Daylight Savings...
- Page 57 Time). Sebct On if you want to turn the adjustment on and off manually. Sebct Off to turn off adjustment. and Time function only available n the set to Manus - The Cock screen appears. and Time manually. You can set the current date and time...
- Page 58 using your remote. Availabb only when is set to Manus • Seep Automatically shuts off the TV after a preset period of time. (30, 60, 90, 120, 150 and 180 minutes). period of time using remote° cancel Seep • On Time _...
- Page 59 that your turns automatically a time a day your choosing. three separate °Yime_ _ configurations. °Yime_ °Yime_- °Yime_- clock before must use the On Time_: Setup: Select Mon_-,Fd, Mon_-,Sat, Sat_-,Sun or Manua. If you select Manus, you can select the days you want to activate the timer.
- Page 60 you _ ..ma_k indicates days Ti _'_,,_,'°° °_:_. Set the time that the TV turns on automatically. _t;_. Set the desired loudness. :c_ou_ce.To select what will be turned on when the timer setting is activated. You can set the TV to turn on a specific channel or play back contents such as video, photo or audio files located...
- Page 61 USB device connected before youy USBo is set to (when the TV): Select Ai_ or Cabe. Channe (when the is set to TV): Select the desired channel. Music / Photo (when the Source is set to USB): Select a folder in the USB device containing music or photo files...
- Page 62 automatically. If there music file on a folder device don_t select ining music file, function cor_rectl% not operate file in If there is only show will USB, slide If a folder is too long, folder cannot selected° Each assigned folder: using more than...
- Page 63 of the type USB, make folders assigned have na_eSo recommend that you use stick multi when using the On Time_: On Time_- function may not work built-in USB devices PMPs made MP3 players, manufacturers because TV can long recognize...
- Page 64 devices° If you Time-to play a file may take up 40 seconds or more play the file after the turned On o • Off Time- Set Off Time _ so that your TV turns automatically at a time and on a day of your choosing.
- Page 65 You must set clock before use the Off Tit';_;e_'. <" "Select If you select Man_,_.a,you can choose 000_,_o to turn off want the days you Off ,1"i _'_'-,_,__ your TV..ma_k indicates days you _ Ti __'_,_:_,'°° °_J.Set the time that the TV turns off automatically.
- Page 66 Blocking Programs Security Using this function, you can configure channel related security options. Every time you access the Security functions, the PiN screen will appear and you must enter that PiN. The PiN screen closes and the menu appears. • P_og_'sm Bating The Program Rating Lock feature lets...
- Page 67 you block programs you've determined are inappropriate for your children based on their ratings. To access the Program Rating Lock feature and make any changes, you must enter a PiN (personal identification number). To watch a blocked program, you must also enter the same PiN.
- Page 68 0-0-0"o Rating: You can block TV programs based on their ratings. This function allows you to control what your children can watch. Rating displays a grid with locks. The following categories are on the left side: Young children - TV-Y7: Children 7 and over - TV-G: General audience...
- Page 69 _ TV_--PG: Parental guidance - TW14: Viewers 14 and over - TWMA: Mature audience The following categories are on top: - ALL: Lock all TV ratings. Fantasy violence Violence o. Sexual situation Adult Language Sexually Suggestive Dialog block content, select...
- Page 70 lock _click entry field exa_ple_ click the intersection of V and °___/', o v_MA_ block all that p_og_ams violent adults° lock unblock ego_x click unblock all the c ego_ies in iCOn° click lock unde_ blocked PIN code when requested°...
- Page 71 Movie Rating (M At: You can block movies based on their MPAA rating. The Motion Picture Association America (MPAA) has implemented rating system that provides parents guardians with advanced information on which films are appropriate children. Rating displays column with locks and the following ratings categories:...
- Page 72 - G: General audience (no restrictions). - _ _. Parental guidance suggested. - _ _ lo. Parents strongly cautioned - R: Restricted. Children under 17 should be accompanied by an adult. NC_-17: No children under age 17. - X: Adults only.
- Page 73 block all X-rated movies° rating also g_ouped clicking ego_y blocks all pa_ent would block along with example, if you block the pG_o_'S3 ego_x NC-S7 and X will alSOo auto_ ically lock unblock ego_x click iCOn° Canadian Eng ish Rating: You can...
- Page 74 block TV programs based on their Anglophone Canadian ratings. Canadian Eng ish Rating displays column with locks and the following ratings categories: Programming intended for children under age 8. C8+: Programming generally considered acceptable for children 8 years and over to watch on their own.
- Page 75 - G: General programming, suitable all audiences. - _ _. Parental Guidance. - 14+: Programming contains themes or content which may not be suitable for viewers under the age of 14. - 18+: Adult programming. block certain lock "click entry field example, click the 18+ lock block...
- Page 76 also rating g_ouped clicking category blocks all pa_ent would block along with block the ito For_example, and 18+ will catego_x blocked° automatically lock unblock categorx click iOOno Canadian F_ench Rating: You can block...
- Page 77 their French programs based Canadian ratings. Canadian F_ench Rating displays column with locks and the following ratings categories: - G: General ans+: Programming generally children considered acceptable on their 8 years and over to watch OWn, - 13 ans+: Programming not be...
- Page 78 suitable children under arts+: Programming suitable children under ans+: Programming restricted adults. block certain entry field lock click ans+ exa_ple_ pyogyams block 18 a nS+,o...
- Page 79 rating also g_ouped clicking category blocks all the pa_ent would block along with if you block the ans+ example, 13 ans+, 16 ans+ and catego_% blocked 18 arts÷ will auto÷atically alSOo lock unblock categorx click iCOn° n osdab/e U_S_ Rating: Parental...
- Page 80 restriction information you can use while watching DTV channels. information downloaded fro_ the broadcasting station, noadabb _S_Rating deactivated° Parental restriction information autorsatically downloaded while channels° It may take several seconds° n/osdab/e Rating menu...
- Page 81 available fo_ _ use afte_ info_mation broadcasting downloaded fro_ station° depending broadcasting available station, use° Parental restriction levels differ depending the broadcasting station,_ The default n osdabb U_S_ Rating change depending the downloaded...
- Page 82 info_m iOno on-screen display anothe_ language, nosdab/e RsiI_ing in English onlyo Blocking one rating will auto_ ically block othe_ categories that deal with sensitive e_ialo titles {Fo__example::::: o oetC) and ratings...
- Page 83 o oetC/ may {Fo_ _ example::::: broadcasting diffe_ depending station° • Change The Change PIN screen will appear. Choose any 4 digits for your PiN and enter them in Ente__ PIN fields. Re- enter the same 4 digits in Confirm PIN fields.
- Page 84 How to watch restricted If the TV is tuned to a restricted program or movie, the P_og_sm Rating Lock will block it. The screen will go blank and a pop- Enter the PIN to up message appears. unblock the program or movie using your remote.
- Page 85 buttons following sequence PIN to "0_ mode, which O- O- 0 _::::: M UT E _¸ (power On/o...
- Page 86 Economical Solutions So ution So ution M@_su --> Ene_gy Saving ® Lets you adjusts the brightness the TV in order to reduce power consumption. If you select Picture Off, the screen is turned off, but the sound remains on. Press any button except the volume button...
- Page 87 ® To enhance power savings, the picture settings will automatically adapt to the light in the room. Back ight If you Picture set to Eco Senso_ will menu, auto aticallyo Back ight Light :When is set to On, you can manually adjust...
- Page 88 minimum screen brightness. E,.o-_" display brightness change /become slightly darker brighter/ the light intens depending control YO0_° inimu brightness with function° ® To avoid unnecessary energy...
- Page 89 consumption, you can set how long you want the TV to remain on if it's not receiving a signal. Disabled when an attached saving Ùde° Po e_"Off ® The TV will automatically turned off when no user operation is detected 4 hours.
- Page 90 Picture In Picture (PIP) M@NU You can watch a program whose signal has passed through the TV's tuner and video from one external video source simultaneously. For example, if you have a cable box connected to the Cable In jack, you can use PIP to watch programs from the...
- Page 91 player attached HDM! jack. While Smart Hub or Rating is on, cannot PIPo • p_p Activate or deactivate the PIP function. ® Select either Ai_ or Cabe as the input source for the sub-picture screen. • Channe Select the channel for the sub-picture screen.
- Page 92 ® Select a size for the sub-picture screen. • Position Select a position for the sub-picture screen. In Double I_-1__ode, cannot select Position° • Sound You can choose to listen to the sound from the main picture or the sub picture.
- Page 93 turn the TV off while watching RIP function PIP _ode, reset to turn your must turn PIP mode° You may that the picture the PIP becomes slightly unnatural use the main view ga_e ka_aokeo function°...
- Page 94 RIP Settings::::: picture external will main screen picture the TV's tune_ will PIP sub_ picture - Main picture: Component, HDMI - Sub picture: TV...
- Page 95 Using the TV with a Keyboard and a Mouse Manage_ _ Manage_ _ M@Bu --> this function, you can set up Using input devices to use with the TV. You can check your device list and adjust the settings in this menu. model Depending may not...
- Page 96 Lets you use a USB or Bluetooth keyboard with your TV. if you want to use a USB keyboard, connect it on the USB port. if you want to use a Bluetooth keyboard, connect it using the Bluetooth function. Available only when keypad appea_s...
- Page 97 list. you can only use one keyboard keyboard, even if several are connected. You can add the Bluetooth keyboard. _'Ii _' 1 I% I='}_1'i _ Sets the default options for the keyboard language and type. Set a language L"', "_" for your keyboard.
- Page 98 itch Input Language: Select a key sequence to change switching input language. Settings ® Lets you use a USB or Bluetooth mouse with your TV. If you want to use a USB mouse, connect it on the USB port. If you want to use a Bluetooth mouse, connect...
- Page 99 a PC. Select which mouse from your mouse list. only mouse, even several connected. Bluetooth You can add the Bluetooth mouse. Options Sets the default options for the mouse buttons. Button: Sebct the main R_ima_y...
- Page 100 button want click select on screen. - Pointe_- Size: Set the size of the on- screen mouse pointer. - Point®__ Speed: Select the speed of the mouse pointer. ing the TV°s _enu with _OUS@ 1. Connect a USB or Bluetooth mouse on your TV.
- Page 101 3. Click a menu you wish, and then you can use the menu to same way as on a PC.