Tape-Remaining Display; Electronic Indexing - RCA CC4392 User Manual

Tape-Remaining Display
The tape-remaining display shows the
approximate amount of tape remaining for
recording or playback.
Tape-Remaining Display in
LCD Monitor or Viewfinder
Press DISPLAYto display the tape-
remaining indicator in the viewfinder
or on the LCD monitor.
• The camcorder takes approximately
ten seconds to calculate the tape
remaining when you first start playing
or recording a tape.
.... appears while the
camcorder calculates the amount of
tape-remaining.
Once tape-remaining has been
calculated, it automatically updates
and is readily available as long as the
same tape remains in the camcorder.
• When _l appears, all or most of
the tape remains.
• =_ and =_ appear as the tape is
being used.
• When the tape is almost at its end,
TAPE END flashes in the viewfinder
or on the LCD monitor.
Electronic Indexing
Each time you begin recording (after the
camcorder has been turned off for at least
four hours), the camcorder automatically
records an index mark at the beginning of
the new recording.
When you play back the indexed tape in a
VCR that has a compatible indexing
feature called "VHS Index Search
System" the invisible marks can be
located automatically. See your VCR
Owner's Manual for index playback
instructions.
INDEX
INDEX Display in
LCD Monitor or Viewfinder
When the DISPLAYbutton is pressed so
the displays appear, INDEX appears
briefly to let you know the camcorder is
recording an index mark.
Note: The camcorder does not record index
marks every time you stop and start recording.
An index mark is recorded only once - at the
start of each day's recording session
(or whenever the camcorder has been turned
off for four hours).
30