Table of Contents
Advertisement
The first step in connecting
your TV is obtaining the signal. Your TV 19LB30RQD/22LB45RQD
has a side panel, which allows you to
receive analog and/or digital television channels via TV jack.
Before connecting your TV, determine
using an antenna or a cable service to obtain the signal.
A. Antenna
Connect the antenna to TV via coaxial cable on TV jack of the side panel. You are ready to receive air local digital and
analog channels.
B. Cable -rv service
Connect the cable TV wall jack to TV via coaxial cable on TV jack of the side panel. You are ready to receive off-air local digital
and analog channels.
C. Set-Top
Box
If you use a set-top box, you may need to call your cable company or satellite service provider, which use a special connection,
please refer to the user's guide of set-top box.
Note: Do not plug the AC cord until you have accomplished
all the connections.
AC
100-120V
60Hz
Cable TV
Antenna
AC Power Cord
(Connect after all the other connections
are done.)
10
Advertisement
Table of Contents
