Using The Remote Control; Installing Batteries; Remote Control Operations - RCA RS-1247 User Manual

18
INSTALLING BA'PI'ERI ES
The remote control must be inserted with 2
AAA batteries prior use. Follow the steps
below to ensure correct installation.
.
Fit tl_b tip of your index finger into A,
slightly push the tab of the battery
compartment lid towards direction B,
lightly lift upwards to detach the lid.
.
Before inserting the batteries, observe
the polarities (that is, + and - ) of the
batteries, then relate the polarities to the
engraved diagram inside the battery
compartment. Now insert the batteries.
,
After installation of the batteries, replace and
fit the lid to cover the batteries. Lightly push it
close.You should hear a small "CLICK" sound
from the closing of the tab.
REMOTE CONTROL OPERATIONS
1. Press POWER to turn on system.
2. To select one of the available modes: Tuner,
CD or Tape, press TUNER or CD or TAPE.
Note: The RECORD button on the
remote control is inactive for this model.
3. To see a display demonstration of the
system, press DEMO.
4. To turn off system, press POWER again.
FoR SOUND EFFECT AND VOLUME ADJUSTMENTS
.
Press SUPER BASS to enhance heavy-
based sound.
.
To select one of the five preset sound
effects, press PRESET EQ repeatedly to
toggle between the five Preset EQ (Preset
Equalizers): Jazz, Rock, Classical, Techno,
Flat.
.
.
Press MUTE to silence the sound output.
Resume to normal by pressing MUTE
again.
Adjust the sound output level by pressing
VOL + to increase or VDL - to decrease.
TUNSR CD TAPE
000
r- pLAy _
PAUSE
<2; ©
TRACK STOP TRACK
REPEAT DISC SKIP SHUFFLE
000
RECORD DEMO
0 0
PRESET TUNING SEEK
o o/