Table of Contents
Advertisement
References
Glossary
Antenna
A device used to receive broadcast
signals from TV stations.
Audio
Sound reproduced
by the TV.
Audio/video
cables
Cables that carry sound and
picture signals from one
component
to another.
Autocolor•
•
Adjusts the Color and Tint of the
picture signals to the proper
bahincefor
all channels.
AutoProgram
A procedure
that automatically
adds only the active channels in
your area to the TV's memory.
Brightness
.
Light and dark areas of a picture.
Channel
Label
A nam e that is given to a specific
channel number.
Channel
Memory
Where channels are stored after
they have been placed in memory.
Channels can be added or deleted
from channel memory.
Commerical
Skip
A feature that allows the viewer to
scan other channels during
commercials,
and return to the
original channel after a timed
break.
Component
Device such as VCR, laserdisc
player, audio equipment,
camcorder,
etc.
Disabled
Turns off feature.
Display
A word, words or graphics
that
appear on the TV screen.
Inputs
Located on back of the TV for
connection
of a component
to the
TV. Used to route signals into the
TV from components.
Jacks
Connectors located on the back of
•the TV for connecting
antennas or
other components.
Menu
A listing of features, controls,
and
adjustments
shown on the TV
screen that can be changed.
Mono
Slang for monaural.
Sound comes
through onechannel.
•
On-Screen
Display
See Display.
•Outputs
Located on back of the TV for
connection
of another
component.
Signals are routed out of the TV
into the other component.
Picture-in-picture
A feature that allows you to watch
two channels at the same time, a
small picture within a big picture.
The smaller picture comes from a
VCR or other component
connected to the TV.
Picture
Reset
Returns all of your TV pi(ture
adjustments back to the factory
setting.
PIP
Short for picture-in-picture.
Sharpness
Clearness
of a picture.
SKIP
See Commerical
5kip.
Signal
Electrical waves that are sent or
received through
cables or through
the air.
Sleep Timer
A feature where the TV can be set
to turn off at a specific•time within
four hours.
Source(s)
Components
or devices that are
connected
to the TV.
Stereo
Sound signals that come through
two channels
(left and right).
Tone
Quality of the sound.
Tuner
A device that receives and selects
signals.
The desired signal is
selected by the tuner.
Unusable
Signal
A message that shows no signal is
coming in on the video input.
Video
Picture reproduced
by the
television.
35
Advertisement
Table of Contents
