Basic Pip Connection - RCA P52921YX3-G User Manual

BASIC PIP CONNECTION
Cables
You will use the following cable to make your connection:
Coaxial Cables: Carries the signal from the
antenna or cable directly to the television or
through a cable box, as needed by your cable
system.
AudioNideo Cables: Carries sound and video
from the component to the TV.
S-Video Cable: Carries video from an S-Video
capable component which provides best
picture quality.
TV and Stereo VCR
CABLE, CABLE BOX, OR ANTENNA
Once you have completed this connection go to "Step 3:
Connect the G-LINK Cable" on page 9.
How to View Your VCR
To watch the VCR in this connection, press TV to put the
remote control into TV mode, then press WHO°INPUT to
scroll through the video input channels until you tune to
VlD1 input.
In the Interactive Setup section you can program the TV to
automatically tune to the VlD1 input channel when you
turn on the VCR.
Most Audio/Video cables are combined
into one cable with three heads on
each end.
We show individual cables
in these sample v_o ,ow)
connections. Either
_
may be used, but Right Audio ( red)
yOU must be sure to
connect Video to " )
Video, Right to Right
and Left to Left.
5