RCA P50830 User Manual page 68

TV AND MONO VCR
(CONNECTION A)
This information applies to Connection A in the Connections
Foldout.
Connection A provides:
• stereo sound from broadcast programs
• mono sound from VCR
• Picture in Picture (PIP)
• watch one channel on TV while recording another channel
To use this connection you must have:
• (2) audio/video cables
• (2) coaxial cables
To connect:
1. Connect cables as shown in Connection A.
2. Return to First Things First, then follow the steps in the
Interactive Setup.
USING CONNECTION A
To watch TV programs:
1. Turn VCR off.
2. Press TV and tune to a channel.
To record one program and watch another:
1. Press VCR1 and tune to a channel.
2. Begin recording.
3. Make sure the TV/VCR switch on the VCR is set to TV.
4. Press TV and tune to a channel.
To play a tape on the VCR:
1. PressVCR1.
2. Press PLAY.
CABLE, CABLE BOX, OR ANTENNA
VCR 1
IN FROM ANT
CH4
e CH3
OUT TO TV
e
CABLE/
ANTENNA
See Connections Foldout,
Connection A
66