Table of Contents
Advertisement
Noisy stereo reception
No picture,
no sound but power light
is on
Sound okay, picture poor
Picture okay, sound poor
• May be a weak station.
Use AUDIO
button to change STEREO/SAP
function
to MONO
setting instead of STEREO.
• Maybe someone changed
CABLE/AIR
function to wrong position.
• Maybe a vacant channel is tuned.
• For Channels
90, 91, and 92, make sure the component
connected
to those
INPUT jacks is turned on in order to see picture.
• If watching
VCR (connected
only through
antenna input), make sure TV is
tuned to channel
3 or 4-same
as CH3/CH4
switch on VCR.
Also check to
make sure TV/VCR switch on VCR is in correct position.
Picture appears tilted
No closed captioning
Black bars appear onthe
screen
• Check antenna connections.
• Try adjusting
SHARPNESS
function
to improve
weak signals.
• Try another channel.
• Try adjusting
VOLUME,
BASS, and TREBLE
controls.
• If station is sending stereo, _try changing
STEREO/SAP
funcl_ion to MONO
setting for clearer sound.
No stereo on known stereo station
* Make sure STEREO/SAP
function
is in STEREO
mode.
When menu is displayed,
pressing
* Maybe remote is. not in "TV Mode".
Press TV button, then press RES/MEM
RES/MEM
does not go to previous
again.
function.
• Try adjusting
the PICTURE
TILT switches
on the back of the TV. (Select
models
only.)
Details are on page 3.
• Turn on the CAPTIONING
function.
.. TV program
does not have closed captioning.
L
--
• Turn off the CAPTIONING
feature.
36
Advertisement
Table of Contents
