Advertisement
Quick Links
PROSCAN ®
Assembly
Instructions
for
,
"E&Ti"_RED OCTO
Stand Models
RB2710
/ RB3110
/ RB3510
The contemporary
design of this stand and its
companion
TV models will complement
the furniture
iLnany room. The stand gives you beautiful,
organized
,storage for your video and audio equipment.
Advertisement
Summary of Contents for ProScan RB3110
- Page 1 PROSCAN ® "E&Ti"_RED OCTO Assembly Instructions Stand Models RB2710 / RB3110 / RB3510 The contemporary design of this stand and its companion TV models will complement the furniture iLnany room. The stand gives you beautiful, organized ,storage for your video and audio equipment.
- Page 2 Attaching and Adjusting Glass Doors 4. Insert the top hinge of the glass door into the top bushing. Hold the glass door up next to the stand to determine where the top hinge will be attached. You will repeat (If the bushing is resting on top of the hinge, insert the steps 1 through 5 when attaching the opposite glass door.
- Page 3 Positioning and Securing TV on Top of Stand The TV cabinets are designed with areas on the bottom and back of the cabinet that allow for placement of the TV on the stand. Plastic dowels are used to keep your TV in place while the brackets secure the TV to the stand. Your TV model determines which brackets you will use.
- Page 4 Follow the directions below for model (s): PS31108 PS31160 1. Attach the "L" bracket as shown at the right. 2. Align the holes in the bracket (F1) with the holes in the TV and top of the stand. 3. Insert the cabinet screw (F4) into the top of the bracket (F1) and tighten.