RCA F27630 Owner's Manual page 11

Using Your TV and Remote
With VCRs: Setting the VCR1 Channel
The VCR 1 Channel works with VCR1 on the remote. If the VCR 1 Channel
is set, pressing VCR1 selects the channel to see the VCR picture. The
VCR 1 Channel setting depends on which diagram you have used from the
Connection Guide. If you want to turn this feature off, set the VCR 1
Channel to Disable. Refer to the chart below for your setting.
1. Select the Setup Menu
Controls Ad
13
A. Press TV to set the remote to
control the TV.
B. Press MENU to select the Setup
menu. This menu is white.
2. Highlight VCR1 Channel
Controls Alarm Ad
13
A. Press CHANNEL down to
highlight the VCR 1 Channel.
B. Press + to highlight the channel.
3.
Enter channel number
4. Press DONE to save the
setting
Controls Alarm Ad
13
A. Enter channel 00, 03, or 04.
Choose your setting from the
chart below. Press CHANNEL
down until "Disabled" is
displayed to turn the feature off.
B. Press DONE to save the setting.
• Diagram used from the
Connection Guide:
1B, 1C, 2B, 2C, 3B, 3C, 4C, 5C
4B, 5B
J
Set VC_R 1 Cha___ _el
to-- i
3 or4 (same as 3/4 switch)
9