Display; Electronic Indexing - RCA CC4393 User Manual

Camera Features ....
Tape-Remaining Display
The tape-remaining display shows the
approximate amount of tape left for
recording or playback.
Tape rem,dmn:4di.vfla.vwhk h duna_
III [/IL' L.( 'O mo¢litOl oi
view/imler
• Press the DISPLAY button on top of
the camera to display the on-screen
display. The tape-remaining indicator
appears in the viewfinder or LCD.
• The camcorder takes approximately ten
seconds to calculate the remaining tape
when you first start playing or record-
mga tape.
.... appears while the
camcorder calculates the amount of
tape remaining•
Once the remaining tape has been
calculated, it is automatically updated
and readily available as long as the
same tape remains in the camcorder.
• When _m,,,,m appears, all or most of
the tape remains.
• _ and _E:_m appear as the tape
is being used.
• When the tape has approximately five
minutes left, "'TAPE END" flashes in
the viewfinder or on the LCD monitor.
Electronic Indexing
Each time you begin recording (after the
unit has been turned off for at least lkmr
hours), the camcorder automatically
records an index mark at the beginning of
a new recording.
When an indexed tape is played back in
a VCR that has a compatible indexing
feature (called "VHS Index Search
System"), these invisible marks can be
located automatically. See your VCR's
Owner's Maraud Ibr index playback
INDEX
INDEX display which shows m
tile LCI) monitor or view/inder
instructions.
When the DISPLAY button is pressed and
the on-screen menu appears, "INDEX"
appears briefly to let you know the
camcorder is recording an index mark.
Note: The camcorder does not record index
marks ever 3, time you stop and
start recording.
An index mark is recorded
only once -
at the
start (_/'each re_orditt,_ session (or
whenever
the unil has heepl turned qffjbr /bur /tours).
32