Table of Contents
Advertisement
Other Information
The Remote Control
Doesn't Work
•
Something
might be between the remote and the remote sensor on the component.
Make sure
there is a clear path.
•
Maybe the remote isn't aimed directly at the component
(DVD, TV, VCR] that you're trying
to operate.
•
Maybe batteries in remote are weak, dead, or installed incorrectly.
Put new batteries in the
remote. {Note, if you remove the batteries, you may have to reprogram the remote to operate
other components.]
•
You might need to reset the remote: remove batteries and press the number I button for at
least 60 seconds. Release the 1 button,
replace the batteries, and (if necessary) program the
remote again.
Problems with V-Chip/Parental
Controls
The rating limits don't work
•
You must activate the settings.
I don't remember my password and I want to unlock the TV
•
If you forget your password you can reset it. Enter 5898 as the password and then change it to a
new
one.
DVD Problems
Can't advance through a movie
•
You can't advance through the opening credits and warning
information
that appear at the
beginning
of movies because the disc is programmed to prohibit
that action.
The invalid icon appears on screen
•
The feature or action cannot be completed
at this time for one of the following
reasons:
•
The disc's software
restricts it.
•
The disc's software doesn't support that feature (e.g., angles).
•
The feature is not available at the moment.
•
You've requested a title or chapter number that is out of range.
The picture is distorted
•
The disc might be damaged. Try another disc.
•
If you're using FORWARD or REVERSEbuttons, it is normal for some distortion
to appear while
scanning.
26
Other Information
Advertisement
Table of Contents
