RCA P60752 User Manual page 20

The CAPTIONING feature lets you display as text on the screen the audio
1. Repeatedly press MENUoPROG to select SETUP
MENU and then press + or :- to display the setup
2. Repeatedly
press
, MENU.PROG-
to select.
function, then
press: + or - to
adjust it.
The setup menu will automatically disappear
from the screen if you do not press + or -
within a few seconds.
Via remote control, your TV will "remember"
which function you disPlayed last--_ven after the
menu has d!sappeared from the screen. So, if you
want to adjust the same functionagain, simply
press the +or - button on the remotec0ntrol.
The last function you adjusted will appear on the
TV screen.
18
portionof certain programs encoded with the Closed Captioning (CC)
information. Two types of closed captioning are available: Captions 1 and
Captions 2. Select Captions 1 for full translation of the primary language in
your area. Captions 2 is used for an alternate service, such as secondary
language translation or simplified English. Two Text modes are also
supported.
By setting the SLEEP TIMER, you can program your TVto turn itself off
after a certain period of time. This is useful whenever you want to watch TV
for an hour or so before going to sleep. Press the + or- button to select the
length of time you want the TV to stay on.
You can program your TV to turn on and/or off at the times you choose by
setting the ALARM function.
CHANLABEL lets you program names (or labels) fot_the channel numbers.
The names you select will then appear on the screen whenever the channel
number is displayed.
x
The PARENTAL CONTROL feature lets you lock out any channels that you
don't want your children to watch. Pressing + or - switches this function
from OFF to ON. When this function is set to ON, channels that have been
locked out with the CHAN CTRL function cannot be viewed. When this
function is set to OFF, all channels can be viewed:
The CHAN CTRL (Channel Control) function works hand-in-hand with the
PARENTAL CONTROL function. It lets you select the channels you want to
lock out. First select the channel number you Want to lock out and then
press + to change this function from NORMAL to LOCKED. When the
PARENTAL CONTROL function is set to ON, the channels you locked with
this function cannot be viewed.
When you press + or - to start the AUTOPROGRAM function, the TV will
automatically cycle through all channels and place the active channels for
your area in its channel memory. Pressing the CHAN up or down buttons
will then allow you to scan only active channels.
The CHANMEM function allows you to erase and add channels to channel
memory as desired.
Because your TV has two separate antenna inputs on the back labeled
ANT A and ANT B, you can connect two different signal sources, if desired.
By pressing + to change the ANTENNA function, you can switch back and
forth between the two signal sources. Each time you press +, the antenna
input will change.
The'CABLE/AIR function tells your TV whether you have a cable-TV system
or a home antenna connected to the TV. Your TV is so automatic that you
will probably never need to change this function. When your TV
autoprograms, it automatically adjusts the CABLE/AIR setting for you. If
you should ever need to override the automatic setting, press + or- to
change it.
The VCR 1 CHAN function lets you program to which channel the TV will
automatically tune when you press the VCR I bUtton on the remote,
The VCR 2 CHAN function lets you program to which channel the TV will
automatically tune when you press the VCR 2oLD button on the remote.
The CABLE CHAN function lets you program to which channel the TV will
automatically tune when you press the DSS*CABLE button on the remote.
After you set the clock, you w!ll be able to see the on-screen time display
whenever you change channels or press the DISPLAYbr TV button on the
remote control. To set the clock when this function is selected; first press
and hold - to set the correct hour (including AMand PM). Then press and
hold + to set the correct minutes.