Table of Contents
Advertisement
RECEPTION
Some TV programs are broadcast with stereo audio or a second
audio program
(SAP) which offers a second language. The
Reception feature lets you select the type of audio you want to
record. Press 1 to switch between
Reception: STEREO, MONO,
and SAP.
•
Select STEREO for normal or stereo broadcast TV recording.
•
Select MONO if the stereo signal is weak and the sound is too
noisy.
•
Select SAP to record a second audio program
instead of the
normal audio on both the hi-fi and linear tracks.
TAPE PLAYBACK
The VCR records the same audio on both the Hi-Fi and linear
tracks on the tape. Hi-Fi sound is recorded on separate left and
right stereo channels. Monaural
sound is recorded on the linear
track. Press 2 to switch between
Tape Playback: HI-FI, LINEAR
and MIX.
To enjoy Hi-Fi sound, connect your VCR to a stereo television
or
amplifier/receiver
using the audio/video jacks. The Tape Playback
feature
lets you select which audio you play back.
•
Select HI-FI to play back sound recorded on the Hi-Fi track
and for normal use.
•
Select LINEAR to play back the sound recorded on the linear
monaural
track, such as a second audio program
(SAP), or a
dubbed voice-over.
•
Select MIX to play back the sound recorded on both the
linear track and the Hi-Fi track, sound-on-sound.
I To receive Hi-Fi stereo sound, use
1
audio-video cables with a compatible
TV or receiver. Using only the RF OUT
jack will not produce stereo sound.
42
Advertisement
Table of Contents
