RCA T19064 User Manual page 29

Copying and Editing Tapes
Operating Instructions (Refer to hookup on page 30.)
rc_rding of I#[e_l_n
pro
rgrali_ actd o_her _rl_l_r_l_
_iLay In f_ n_ upon I_m rlghl_
of o_l_'r_,
Use another VCR or camcorder as the playback VCR and
the TV/VCR as the recording VCR.
1. 'Turn on the VCR or camcorder and the TViVCR.
2.
Press O0 on TV/VCR's remote to select the line input
(VIDEO1 or VIDEO2). Pressing O0 once tunes the 'IN'/VCR
to the AUDIO/VIDEO1 input jacks on the real' of the
"PV/VCR. Pressing 00 twice tttnes the "PV/VCR to the
AU DIO/Vl DEO2 input jacks on the front of the TViVCR,
3. Insert the tape you want to copy into the playback VCR
or camcorder. Insert a blank tape with safett tab intact
into the TV/VCR.
4.
6,
7.
8.
StaYr the playback VCR or camcorder playing. If the
tape was not recorded on the playback VCR, streaks
may appear and you may need to adjust the tracking.
When you reach the place you want to begin copying,
place the playback VCR or camcorder in play pause.
Press REC, then PAUSE, on the TViVCR's remote.
Press PAUSE on both the VCR or camcorder and the
TViVCR's remote at the same time to begin copying
the tape.
Edit out segments that you do not want m copy- by
pressing PAUSE on the TV/VCR's remote to pause the
tape. Then, locate the next segment you want to copy- on
the playback VCR or camcorder by using FT, NEW, or
PLAY Press PAUSE on the playback VCR or camcorder.
Press PAUSE at the same time on both the VCR or
camcorder and the TViVCR's remote to resume
copying.
Press STOP on both the VCR or camcorder and the
TViVCR's remote when you are finished.
VI_E01
27