Advertisement
S-VHS or Standard
VHS Camcorder
(This connection
allows you to play back tapes in the camcorder
and watch them on the TV.)
AUOIO
sv.scab,°
._o_,,_,c,o_ Back oITV
(sometimes a separate cable
that attaches directly to camcorder)
@
t @
Am.£ ANTENNA
....
AV OUTJack
J
(Audio/Video Out)
An S-VHS or standard camcorder can be connected directly to
your TV. If you have an S-VHS camcorder, connect the S-VHS
video cable to the S-VIDEO connector on your TV. if you have
a standard VHS camcorder, connect the video cable to the
VIDEO INPUT 1 jack on the back of your TV. With either
video connection, attach the audio cable to the INPUT 1
R/MONO audio jack.
Notes:
When the Adapter's S-VHS Cableis connected to the S-VIDEO
connector, the videoplug does nothave to be connected. However,you
may preferto plug it in anywayto keep itout of the way.The S-VHS
video will automatically overridethe VIDEOINPUT 1 signalwhen you
select Channel90.
S-VHS
or Standard
VHS
Camcorder
(This connection
allows you to record onto the camcorder
whatever
is currently being displayed on the TV screen.)
Be sureto connect the videocable, however,if you plan to use the
camcorder for picture-in-pictureviewingor if you plan to use the
SELECT OUTjacks for recording. When recordingfrom the SELECT
OUTjacks, tune to channel 91 to see the signal from the camcorder.
When displaying picture-in-picture,the TV automatically minimizes
any annoying differences in tint between the small and large picture by
electronically coupling the S-VIDEO input to the VIDEO I input.
Operation:
• If the camcorder is connected to Ihe VIDEO INPUT I jack
(instead of the S-VIDEO connector), select channel 91 on the
TV to view whatever the camcorder is playing.
• If the camcorder is connected to the S-VIDEO connector and
INPUT 1 audio jack, select channel 90 on the TV to view
whatever the camcorder is playing.
Audio
Back of TV
Video
AV IN Jack
(AudioNideo
In)
AudioNideo
Input Cable
(usually supplied with
camcorder)
This connection will let you record onto the camcorder
whatever is being displayed on the screen such as a TV
program. You'll also be able.to record signals from a VCR (or
similar device) that is connected to the TV's INPUT 1 or 2
jacks.
The TV must remain turned on during recording. If you change
channels on the TV, the channel change will be recorded on the
camcorder tape unless you pause the camcorder during
recording.
You may also want to use this connection to dub or edit VCR
tapes with two or three camcorders (or VCRs). By connecting
one camcorder (or VCR) to the INPUT 1 jacks and another
camcorder (or VCR) to the INPUT2 jacks, you'll be able to
selectively edit and record whatever is playing on the TV screen
onto a third camcorder connected as shown here to the
SELECT OUT jacks.
If you connect a surveillance
system to your monitor,
you'll
be
able to record what the camera is displaying
on the TV screen
by connecting
a camcorder
(or VCR ) to the SELECT
OUT
jacks as shown here.
Just remember
that you'll be able to record whatever
is being
displayed
on the TV screen.
To see the signal from a device
connected
to the INPUT I jacks, select channel 91. Select
channel 92 to see the signal from a device connected
to the
INPUT 2 jacks.
Notes: Signals from the S-VIDEO connector do not come thru the
SELECT OUT jacks. To record from an S-VHS component, remember
to also connect its regular video cable to the VIDEO INPUT I jack and
then tune the TV to channel 9 I.
Menus, status displays, and .special features such as picture-in-picture
and channel guide will not appear in the recording.
39
Advertisement
