Advertisement
_
_III_TD
EN.book
Page 33 Tuesday, March 17, 2009 1:55 PM
LIST Ol SITTINGS
t
Video
HDMI Video
HDM11080p/24
Output
This feature
is available
Component
Output
De-interlacing
Mode
Black Level
Noise Reduction
• Not available
for
BD-video.
only when the display
device is connected
by
an HDMI cable.
Refer to page 38 for
more information.
HDMI Video Resolution*
• This feature
is available
only when the display
device is connected
by
an HDMI cable.
• Refer to page 38 for
more information.
HDMI Deep Color
• This feature
is available
only when the display
device is connected
by
an HDMI cable, and
when it supports
Deep
Color feature.
480p
720p
1080i
Video
Off
MPEG NR
3DNR
Combo
(3D + MPEG)
off
480p
720p
1080i
1080p
off
With regard to the
DVD-Video
with a copy
xotection,
the resolution
will be set to 480p
regardless
of the setting
here.
If480p
output
is not
available,
480i will be
output.
"Auto":
Outputs the picture in 1080p/24
(1080 progressive
with 24 frames per
second) when it meets all the
conditions
listed below:
The video resolution
and the frame
rate of the material is 1080p/24.
"HDMI Video Resolution" setting is
set to "1080p".
The display device supports the
1080p/24 output.
Outputs
the picture
in 60p.
(60 frames
per second,
progressive)
Sets the resolution
of the video signal
being
output
from the HDMI OUT.
The selected
resolution
must also be
supported
by your TV monitor.
Reduces
the posterization
effect
of
the playback
picture.
"Auto":
Reduces
the posterization
effect
by
automatically
outputting
the 12 bit
color whenever
the unit recognizes
the connected
display
device
supports
Deep Color feature.
"Off":
Outputs
the standard
8 bit color.
Sets the resolution
for the component
output
picture.
The selected
resolution
must also be
supported
by your TV monitor.
Refer also to your TV's manual.
If you have selected
the resolution
not supported
by your TV by mistake
and the picture gets disturbed,
press
and hold [1_ (PLAY)] on the front
panel for 5 seconds to change
the
setting
back to its default.
When HDMI cable is connected,
only
"480i" and the resolution
selected
in
the "HDMI Video Resolution"
will be
available.
"Auto":
Automatically
detects
the film or the
video
content,
and appropriately
converts
it.
"Video":
Selects when the picture
is distorted
when
using "Auto".
Adjust
the brightness
to compensate
for ambient
room
light.
Reduces
the noise of the playback
)icture.
"Off":
Deactivates
the Noise Reduction.
"MPEG
NR":
Reduces
the block noise seen
characteristically
in the MPEG files.
"3D NR":
Reduces
the rough
background
noise
so that you can feel the greater
feeling
of depth.
"Combo
(3D + MPEG)":
Activating
both
"MPEG NR" and
"3D NR".
EN
33
©
©
J
@
©
©
D
@
©
©
F
D
©
©
Advertisement
