Set The Date And Time - RCA PROV700C User Manual

Recording:
Set the Date and Time
After the date and time have been set, they can be displayed and recorded on your
tapes. The clock cell must be installed.
DA TE/TIME/CHAR
+ and- Buttons
SET Button
\ I /
DATE NOV\ 18.97
/ AM 12:00
Indicator in Viewfinder or
on LCD Monitor
POWER Switch and Indicator
1. Make sure the clock cell is installed.
2. Attach a power supply.
3. Place the POWER switch in CAMERA.
The power indicator will light.
4. Press the SET button. The date and
time display appear with a flashing
cursor on the month. The flashing
cursor lets you know which part of the
display you are setting.
5. Repeatedly press DATE/TIME/CHAR
+ or - until the correct month appears.
Note: Press and hold the button to rapidly
advance the digits.
6. Press SET to move flashing cursor to
the next part of the display.
Note: Press and hold the button to rapidly
advance the flashing cursor.
7. Repeat steps 5 and 6 until you have
entered the correct month, day, year,
hour (including AM or PM), and
minutes.
8. Press SET to remove the flashing
cursor and start the clock.
Note: The clock begins when the minute
digits stop flashing. The clock does not
keep time while any digits are flashing.
To Correct the Displays
Press SET to display the time and date
and select the item you want to change.
Use DATE/TIME/CHAR + or - to enter
the correct digit(s).
Repeatedly press SET to remove the
flashing cursor and start the clock.
43