Mitsubishi CK-35804 Operating Manual page 19

Adjusting the color purity
Your Mitsubishi color television has a large screen picture tube and
color purity may be affected slightly by the .earth's magnetic field.
For best results_ follow the instruction below to adjust color purity.
O
k
[
control parLel
!
_Important:
O Turn off the TV set.
O Determine the compass direction where t[_e set is facing. The
direction is determined from the front of the screen fac!ing
forward (Please note the direction of the, arrow).
Select the position for the DIRECTION switch according to the
chart below.
TV SET DIRECTION
North
North East
North West
South
South East
South West
East
West
DIRECTION SWITCH
S NEUTI_AL N
X
X
X
X
X
X
X
X
STRENGTH '_WI3?CH
O Turn the TV on, and check the color performance.
If a color impurity is still present, change the STRENGTH
switch to position "1." If a color impuril:y persists after changing
the STRENGTH switch position, press the DEGAUSS button on
the control panel.
Adjust the color purity switches each time you move tile set to a
new location.
If a color impurity still persists after you readjust the color
purity switches, please contact your Mitsubishi Authorized
Warranty Center.
Getting Started
15