Advertisement
Steps
to Follow
for
Self-Cleaning
Process
To set oven to start cleaning
immediately:
1. Touch SELF CLEAN
PAD.
An automatic
program
of three hours
is pre-set
into control
panel for an average
soiled
oven. If oven is heavily soiled, touch
4 and program
will be extended
to four
hours.
If lightly
soiled,
touch
2 and the pro-
gram will be reduced
to two hours. The pro-
gram time takes
into consideration
the pre-
CLEAN
."
Display
heat time before cleaning and the cool down
time after cleaning
when oven may be un-
locked.
2. Close and lock oven door.
Move DOOR LOCK
LEVER to full right position.
3. Touch
START
PAD.
Indicator
Word
CLEAN
and time of day will
appear
in display.
Indicator
Word LOCK
will
CLEAN
appearwhen
oven temperature
reaches550
° F
LOCK
and door cannot be opened
until temperature
drops
below
550 ° F.
NOTE:
If the word
door appears
in display,
you have omitted
Step 2.
AM
8:4 5 °".'°,
cl o o r
Display
4. Oven
beeps
once
and stops
automatically
after
programmed
cleaning
time
elapses.
Oven door will not unlock
until oven cools to a safe temperature.
When
this occurs,
the Indicator
Word
LOCK goes out. During
the cleaning
process,
the
time remaining
before
having
access to the oven can be recalled
by touching
the
SELF CLEAN
PAD.
To set oven to start cleaning
at a later time:
1. Repeat preceding
Steps I and 2.
3. Touch STOP TIME
PAD.
Touch number pads for desired time cleaning
process is to be completed.
Time
set has to be at least two to four hours ahead of time displayed
on clock depending
upon time to clean, set in Step 1 above. If less time has been programmed,
all E's
appear.
4. Touch AM/PM
PAD.
Touch pad until desired
AM or PM setting
appears
in display.
5. Touch
START
PAD.
ENTER
2:30
STOP PM
TIME
Display
Display
will briefly
show the time of day oven will automatically
turn
on. At that
time the oven will beep once to indicate
oven has turned
on. Display
will show time
of day, CLEAN
and STOP.
6. Oven beeps once to signal
start of delayed
function
and beeps once when oven
stops automatically
after programmed
cleaning
time elapses.
Oven door will not
unlock until oven cools to a safe temperature.
When this occurs,
the Indicator
Word
LOCK goes out.
To stop cleaning
process:
1o Touch
CANCEL-OFF
PAD.
If Indicator
Word
LOCK
is not displayed,
door can be opened;
if LOCK
is dis-
played,
oven will have to cool before
door can be opened.
DO NOT TRY TO UNLOCK
THE DOOR
WHILE
LOCK
INDICATOR
WORD
IS
DISPLAYED.
29
Advertisement
