Notes For The Use Of Usb Devices (Available For 42Pfl3704D Only) - Philips 32PFL3514D User Manual

11 Notes for the Use of
USB Devices
(available for
only)
42PFL3704D
Digital Content Issues
• Only FAT (DOS) formatted (initialized) portable memory is
supported. Errorsin this formatting can result in unreadable
content. If such problems appear try to re-format the card, Be
aware that formatting the card will also delete all the content on it
(pictures, music .... ).
" Only linearjPEG picture formats are supported. Progressive JPEG
and JPEG2000 encodings are not supported.
• The len_h of a filename or directory name is limited to the len$th
specified by the FAT16/32 file systems.
• Max. bevels of nested directories is 19.
• Never use the supported file type extensions (dpg, dpeg, .rap3) as
extensions for directories as these directories will be treated as
corrupted
files.
• The NP3 decoder does not support NPEG1 Layer 1 or Layer 2
playback,
• NP3 Pro files can be played with normal NP3 quality,
• The access and response time of the content on a device can differ
depending on the type or brand of the device.
• The access and response time of the content on a device will
increase the more unsupported or corrupted files are on the
device.
Digital Camera Issues
• If a USB connection between your digital camera and theTV isn't
working, you can try the solutions below to resolve your problem.
• Make sure your digital camera is switched on and verify if the
configuration of your digital camera is correct (see the manual of
your digital camera formore information).
• Some digital cameras allow you to switch off the USB interface.
Make sure that the USB interface is switched on before connecting
to the T_,
• If you have a digital camera with only internal memory (no
removable memory) you can try to copy the content manually to
a USB memory device (e.g, Philips KEY product) using a personal
computer.
• Some digital cameras allow you to switch between PTP (Picture
Transfer Protocol) or"PC Link" and USB Mass Storage or"PC
Drive". Make sure that you select USB Mass Storage or"PC Drive"
on your digital camera,
• If your camera supports different interface settings be sure to try
them one by one or contact the reseller of your camera to find
out the correct setting,
USB Memory Device Issues
• Devices connected to the USB port of yourTV must be "Mass
Storage Class" compliant, If your device (digital camera. NP3 player,
portable hard disl< .... ) is not "Mass Storage Class" compliant it will
not be detected by the content browser oftheT¢
• The following subsets of the Mass Storage Class specification are
supported,
• The implementation oftheTV is based on the "Universal Serial
Bus Mass Storage Class Specification Overview" (v1.2,june 23,
2003) including all documents referenced by the document.The
document can be found on the USB standardization website
(www.usb.org).
• Full support of the USB Mass Storage Class Bulk-OnlyTransport
(blnterfaceProtocol -- 50h).
36 EN
• Full support of SubClass Code = 05h; SFF-8070i spec.
• Full support of SubClass Code = 06h; SCSI transparent command
set.
• For large USB memory devices, when you are in the Content
Browser, it may take a long time before you can access your files.
• When using a USB portable hard disl<,and due to the high power
consumption of the hard disl<,it is advised to use the external
power supply of the portable hard disk to guarantee proper
working under all conditions.