Pip And Split Operation - Panasonic CT-36HX42 Operating Instructions Manual

PIP AND SPLIT OPERATION
PIP and Split Operation
Note: PiP or Split frame can't display the same channel or video source as Main Picture.
PIP Operation
This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the
same time with or without an external video source such as a VCR, cable box, etc.
Main Picture
-- PIP Frame
Note: Audio is from Main Pictureonly.
[] Connect incoming cable to ANT 1 input on back of "iV.
PIP
[] Press (_ to display PIP frame.
PIP CH
[] Select channels for the PIP frame by pressing (_
i
[] Select channels for the Main picture by pressing o, •
or use the remote control numeric keypad.
SWAP
{3 Press (_
to switch the PIP and MAIN PICTURE source.
RECALl
[] Press (_ to view picture source status.
PIP
[] Press _ to cancel PIP frame.
Split Operation
This feature lets you watch two different channels side by side with or without an external video source.
SPLIT
[] Press (_ to display Split screen.
O Select channels for the Split screen
PIP CH
Main Picture
with Audio
by pressing
Split Picture
no Audio
C_H CH
[] Select channels for the Main picture by pressing o, _,
or use the remote control numeric keypad.
SWAP
(_ to switch the SPLIT SCREEN and MAIN
[] Press
PICTURE source.
Note: Audio is from Main Picture only.
RECALL
[] Press (_ to view picture source status.
SPLIT
[3 r'ress _ to cancel Split screen.
,..,..._j
PIP and Split Operation With a Cable Box
To view premium (scrambled) cable channels through your cable box in the Main Picture:
Note: Use this procedure if you want to watch premium cable channels in the Main Picture while viewing a television program or video
in the PIP or Split frame.
Procedure
[] Select ANT 2 in the SET UP menu under Prog Chan (Program Channels).
[] Tune'lV to Channel 3.
PIP SPLIT
[] Press (_ or (_ on the remote control to display the PIP or Split frame.
Note: Audio is from the Main Picture only.
[] Verify the Cable box is ON.
[] Choose channels for the Main Picture by tuning the cable box.
[]
PIP CH
Choose channels for the PIP or Split frame by pressing (_ (_ .
Note: Swap is not available when using the cable box to tune channels. If your cable box has video output, it can be
connected to the TV to aflow you to use all PIP or Sprit functions. See the equipment manual for more information.
11e