First Time Setup - Panasonic TH-37PX25 Operating Instructions Manual

I First Time Setup
For your convenience, First Time Setup menu will be displayed on screen when the set is turned on for the first time. If
needed, follow the menus and procedures displayed on-screen for setting up the features.
You can also make the settings in Setup menu (see pages 36, 37).
Input Setup
Select the configuration of RF input depending on the signal source.
2
Press to select Input Setup.
Press to select Cable only, Cable/Antenna or
Antenna only.
-- Press to enter your selection.
Press to start the Auto Scan.
All available channels with a signal will be
programmed into memory.
Auto Scan
This feature allows you to selectively auto scan channels.
You can scan All, Analog only channels or Analog & Digital channels.
1
Press to select Auto Scan.
Press to enter the sub-menu field.
2
Press to select the sub-menu.
Press to start Auto Scan.
After Auto Scan is completed, the TV tunes to the first channel found during Auto Scan.
To return to the previous menu
MENU
Press O "
To exit the menu screen
EXIT
Press O.
Notes:
• if the EXIT button is pressed at anytime during Auto Scan, Auto Scan will be cancelled and the TV will return to the First
Time Setup menu.
• if a CableOARD is present during the First Time Setup and Antenna (A) is set to cable, Antenna (A) will not be scanned
due to the CableOARD providing the channel map.
22