One Time D-Vhs Vcr Setup - Panasonic Omnivision PV-HD1000 Operating Instructions Manual

*Important: If the remote control POWER, ACTION, PROG, CHAJV, INDEX or ADD/DLT button does not
work when pressed, press the VCR buttonon the remote and try the button again.
Alternate Instructions
Complete the following steps if, any of the following applies:
• You selected _,NO" in step 3 on page 12. ,
• You selected VCR_'CABLE/DSS BOXI_TV ' in step 4
on page 12.
• You selected "NO REMOTE" in step 6 on page 12
(your cable box or DSS receiver is not remote
controllable).
• You use a DSS receiver and selected "YES" in step 8
on page 13.
1
r
Turn on the cable box and J CHANNEL/CLOCK AUTO S ET
set it to the local PBS channel, / co_cr _rE_ CASE
• Ifyou live neara different time
| BA_ D . "_FNYOUTUTSoE
yAo_jC_BLE
zone,makesuretoset the | LOCAL pBS CH THEN.,,
channel in your time zone. l PLEASE PUSHCHUPKEY
• If youusea DSSreceiver,
itmust beturnedoff,
2
Press CH •* to start Channel Auto Set and
Auto Clock Set.
• The following messages appear.
"CHAUTOSET PROCEEDING"
"AUTOCLOCKSET PROCEEDING"
This screen appears to confirm that
auto clock set is completed.
3
Confirm that the time is
correct and press CH •
to exit.
11412000 TUE 12:(_PM
DST:ON
SETTING : CH 02
AUTO CLOCK SET
GOMPtETED
END : PUSH CH UP KEY
If this screen appears, auto
clock set is not available in
your ares. Please set the clock
manually as described below.
I AUTO CLOCK SET 1
IS INCOMPLETE
PUSH ACTION TO SET CLOCK
A Press ACTION to display the
SET CLOCK screen.
B Press &Y and 4 • to
setect and set the month,
date, year, time, and
DST. (DaylightSaving Time).
I_ I" 4 -- ETCL ......
SELECT: KEY 1
SET ;_ KEY
END _ACTION KEY
To Make Corrections,
repeatedly press • • to move the cursor
to the incorrect entry and make the correction.
C Press ACTION twice to _3J3
t_ and exit this mode.
ACTION -
A.
c
C
_kW4 p_ _ Fd
<*O(D,D
ee®]
ooo]
01-
(D r--70-I
SELECT/SET
(&Y'4 I_) keys
B
d
e
_CHANNEL UP
If the displayed time and DST.
are not correct...
If you happen to live close to twotime zones,
the D-VHS VCR may have recognized the
PBS channel (settingchannel) in the wrong
time zone. Please do the following to correct
the situation. - -
a Make a note of the SE'rTING:CH number
shown on screen and press CH • to exit.
b Delete the setting channel from the D-VHS
VCR channel memory. (See the "To Add or
Delete a Channel" section on page 33.)
C Press ACTION to display the menu.
d Press •Y to select "SET CLOCK," and then
press • to display the "SET CLOCK" screen.
e Press •Y and • to select and set "AUTO
CLOCK SET."
Follow the One Time D-VHS VCR Setup
instructions on pages 12 - 14.
• If you use a cable box and have multiplePBS
stations,tune the cable box to a different PBS
stationand try auto clockset usingthe menu.
14