LG 32LC6D Owner's Manual page 82

01. Power
(Command: k a)
To control Power On/Off of the TV.
OS. Screen Mute (Command: k d)
To select screen mute on/off.
Data O: Power Off
Data 1 : Power On
* In a like manner, if other functions transmit 'FF' data based
on this format, Acknowledgement data feedback presents
status about each function.
* Note: In this model, TV wilt send the Acknowledge after
power on processing completion.
There might be a time delay between command and
acknowledge.
02. Input Select (Command: k b) (Main Picture Input)
To select input source for the TV.
Data O: DTV
Data 2: AV 1
Data 4: Component 1
Data 7: RGB-PC
Data 9:HDMI2
Data 1 : Analog
Data 3: AV 2
Data 5: Component 2
Data 8:HDMI1
* If you select input source, we recommend "command x b".
03. Input Select (Command: x b)
To select input source for TV.
Data 00: DTV (Antenna)
Data 10: Analog (Antenna)
Data 20: AV 1
Data 40: Component 1
Data 60: RGB-PC
Data 91 : HDMI2
Data 01 : DTV (Cable)
Data 11: Analog (Cable)
Data 21 : AV 2
Data 41 : Component 2
Data 90: HDMI]
N E
04. Aspect Ratio (Command: k c)
To adjust the screen format.
You can also adjust the screen format using the RATIO
button on remote control or in the PICTURE menu.
Data O: Screen mute off (Picture on)
Data 1 : Screen mute on (Picture off)
06.
Volume Mute (Command: k e)
To control volume mute on/off.
You can also adjust mute using the MUTE button on remote
control.
Data O: Volume mute on (Volume off)
Data 1: Volume mute off (Volume on)
wie en[ii:i:[_: iBi:[ii:_kN:ii_: i:ii
O7.
Volume Control (Command: k f)
To adjust volume.
You can also adjust volume with the volume buttons on
remote control.
Data Min: 0 - Max: 64 (*transmit by Hexadecimal code)
* Refer to 'Real data mapping 1 '. See page 82.
08. Contrast (Command: k g)
To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Data Min: 0 - Max: 64 (*transmit by Hexadecimal code)
* Refer to 'Real data mapping 1 '. See page 82.
09. Brightness (Command: k h)
To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Data Min: 0 _ Max: 64 (*transmit by Hexadecimal code)
* Refer to 'Real data mapping 1 '. See page 82.
>
rT1
Z
_D
X
Data 1 : 4:3 5: Zoom 2
2:16:9 6: Set by program
4: Zoom 1 9: Just Scan
Reserved
81