LG 26LX2R Owner's Manual page 53

Reference
Use this function to specify a TV ID number,
Refer to 'Real Data Mapping' be page 54.
1. Press the MENU button and then use A s _' button to select the
SPECIAL menu.
2, Press the I_ button and then use A / T button to select Set ID,
3 Press the I_ button and then use ,i, / T button to adjust _ ID to
choose the desired TV _D number. The adjustment range of Set
is1 ~_
4. Press EXIT button to return to normal TV viewing.
* Baud rate : 96_ bps (UART)
- Data _en_h : 8 bits
- Parity : None
* Stop bit : 1 bit
* Communication code : ASCH co_
* Use a crossed (reverse) cable.
Transmission
r,c d, an ][
?!Set !D?! ][D_!_![C[ ] I
[Command 1]: First command. (k, x or m)
* [Command 2]: Second command
* [Set iD]: You can adjust the set ID to choose _sired moni_
tot ID humor in Specia_ menu. Adjustment ran_
is 1 ~ 99, When selecting Set ID '0, every con °
nected TV set is controlled. Set ID is indicated as
decimal (1~99) on menu and as Hexa decimal
(0x0~0x63) on transmission!receiving protocol,
[DATA]: To transmit command data.
Transmit 'FF' data to read sta_s of command.
* [Crl: Carriage Return
ASCH code '0x0D'
[ ]: ASCH code 'space (Ox20)'
COMMAND 1 COMMAND 2 DATA
(Hexadecimal)
01. Power k a 0- 1
02` .................. b ............................... * ..................................................
03. Input Select (Sub Picture) x y *
04. Aspe£tR#ti£ ....................................................................... L ................... £.................... _ 3 .......................................
0& Screen Mute k d 0 ~ 1
06, Volume Mute k e 0 ~ 1
07, Volume Centro_ k f 0 ~ 64
09. Briqhtness ................................................................................. k .............................. h ........................ ......................................
10. Co,or k i 0 ~ 64
18, _b_[Pne_ ............................................................................................ L ..................... k_ ..........................................................
13. OSD Select k [ 0 - 1
14_- Key Lock k m 0 - 1
15 Balance k t 0 ~ 64
16_ Key m c Key Code
* : Refer to '02~03 Input sete_L See page 54.
OK AcknQwledaement
r[command2_[
][Set ID][ ][OK][Da_][x} ]
* The Monitor transmP_s ACK (acknowle_ement) based on
this format when receiving norma_ dat_ At this time, if the
data is data read mode, _t indicates present status da_, If
the da_ is data write mo_, it returns the data of the PC
computer,
_'ror Acknowledgem_ #_t
The Monitor transm&s ACK (acknowledgement) based on
this format when receiving abnormai data from non viable
functions or communication errors.
Data 1 : tltegal Co_
2: Not supported function
**Error messages
1, Illegal ID : If Wrong or no ID in the comm_d is wr_ten.
2. I_loTokenLen_h !--2 : If the first argument of the command
does not equals to 2,
3, Error ==TOKEN_ERROR : ff some Special charac_r or
Numeric are written to the first argument of the command
or wrong Space position is wrAen to the first argument of
the command,
4. Illegal Opcedes : ff the Wrong Alphabet is written to the
first argument of the cemm_d
5 illegal Params : if the Wrong parameter is supplie_ to the
end of the comm_d line (means that value of the parame-
ter that is not sup_rted).
53