Table of Contents
Advertisement
Reference
Programming
the Remote Contrtol
i_
The remote control is a multi-brand
or universal
remote control. It can be pro =
grammed
to operate most remote-controllable
devices of other manufacturers,
Note that the remote control
may not control all models of other brands.
1. Test your remote control.
To find out whether
your remote control can operate the component
without
pro-
gramming,
turn on the component
such as a VCR and press the corresponding
MODE button (VCR) on the remote control,
while pointing
at the component.
Test
the POW'ER and CH +I_ buttons to see if the component
responds
properly.
If not,
the remote requires
programming
to operate the device,
2. Turn on the component
to be programmed,
then press the corresponding
MODE
button on the remote control
3=
4.
Press the MENU and MUTE buttons simultaneously,
the remote control is ready to
be programmed
for the code.
There are two ways to find the right code for the component.
A. If you press the OH 4-/- buttons repeatedly,
the codes witl change one aba4ime
Press the POWER button after each code change.
If the right code is found, the
device will turn off
B. Enter a code number
using the number
buttons
on the remote.
Programming
code numbers
for the corresponding
component
can be found on the following
pages. Again, if the code is correct,
the device will turn off.
5 Press the MENU button to store the code
6. Test the remote control functions
to see if the component
responds properly.
If not,
repeat from step 2
54
Hide quick links:
Advertisement
Table of Contents
