Table of Contents
Advertisement
ConnecfMg
21
Advanced
Setting
If you want to setthe network settings manually,
use A/V
to select [Advanced Setting] on the
[Network Setting] menu and press ENTER(®).
1. Use A/V
to select [Wireless] and press ENTER
(®).
[AP List] - Scans all available access points or
wireless routers within
range and display them
as a list.
[Network
name (SSID)] -Your
access point
may not be broadcasting
its network
name
(SSID). Check your access point settings
through
your computer
and either set your access
point to broadcast
SSED,or manually enter the
network
name in [Network
name(SSID)].
[PBC] - If your access point or wireless
router that supports
the PBC (Push Button
Configuration)
method,
select this option
and
press the Push Button on your access point
within
120 counts.You
do not need to know the
network
name (SSID) and security code of your
access point.
[PIN] - If your access point supports
the PIN
{.ode configuration
method
based on WPS(Wi-
Fi Protected
Setup), select this option
and
note the code number
on the screen. And
then, enter the PIN number
on a setting
menu
of your access point to connect.
Refer to the
documentation
for your network
device.
2.
Follow the instructions
of each connection
method
on the screen.
,- @
Note
To use PBC and PIN network
connection,
security mode of your access point must be
set to OPEN or AES.
Notes
on network
connection
Many network
connection
problems
during
set
up can often be fixed by re-setting
the router or
modem.
After connecting
the unit to the home
network,
quickly
power off and/or disconnect
the power cable of the home network
router or
cable modem.Then
power on and/or connect
the power cable again.
Depending
on the internet
service provider
(ISP),
the number
of devices that can receive internet
service may be limited
by the applicable
terms
of service. For details, contact your ISP.
Our company
is not responsible
for any
malfunction
of the unit and/or
the internet
connection
feature due to communication
errors/malfunctions
associated
with your
broadband
internet
connection,
or other
connected
equipment.
Some internet
content
may require
a higher
bandwidth
connection.
Even if the unit is properly
connected
and
configured,
some internet content
may not
operate
properly
because of internet
congestion,
the quality or bandwidth
of your internet
service,
or problems
at the provider
of the content.
Some internet
connection
operations
may not
be possible due to certain
restrictions
set by the
Internet
service provider
(ISP) supplying
your
broadband
Internet connection.
Any fees charged
by an ISP including,
without
limitation,
connection
charges are your
responsibility.
A 10 Base-Tot
100 Base-TX LAN port is required
for wired connection
to this unit. If your internet
service does not allow for such a connection,
you will not be able to connect
the unit.
You must use a Router to use xDSL service.
A DSL modem
is required
to use DSL service and
a cable modem
is required
to use cable modem
service. Depending
on the access method
of and
subscriber
agreement
with your ISP,you may not
be able to use the internet
connection
feature
contained
in this unit or you may be limited
to
the number
of devices you can connect
at the
same time. (if your ISP limits subscription
to one
device, this unit may not be allowed
to connect
when a PC is already connected.)
©
o
Hide quick links:
Advertisement
Table of Contents
