Lenovo ThinkCentre A61 Hardware Maintenance Manual page 128

3. Remove the memory module being replaced by opening the retaining clips as
4. Position the replacement memory module over the memory connector. Make
5. Slide the drive bay assembly towards the rear of the chassis until it snaps into
6. Reinstall the front bezel.
7. Go to "Completing the FRU replacement" on page 140.
122
Hardware Maintenance Manual
shown.
sure that the notch 1 on the memory module aligns correctly with the
connector key 2 on the system board. Push the memory module straight
down into the memory connector until the retaining clips close.
position.