Attaching Soundbar; Removing The Monitor Stand - Dell ST2220L User Manual

2. Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see
Attaching the Soundbar (Optional)
1. Working from the rear of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.
2. Slide the Soundbar to the left until it snaps into place.
3. Connect the Soundbar with the DC power connector.
4. Insert the mini stereo plug from the rear of the Soundbar into the computer's audio output jack or the monitor's audio output jack.
NOTICE: Do not use with any device other than the Dell Soundbar.

Removing the Monitor Stand

After placing the monitor panel on a soft cloth or cushion, complete the following steps to remove the base.
1. Use a long screwdriver to push the release latch located in a hole just above the stand.
2. Once the latch is released, remove the base away from the monitor.
Back to Contents Page
Solving Problems.