Yard-Man 970 Series Owner's Manual page 8

Step 3. Tighten wing nuts.
HE11E
Step 5. Pinch lower handle against moun :ing
bracket with pliers.
Step 6. Move hairpin clip from outer to in ler hole
on left and right handle mounting br ickets.
Inner Hole ....... _
Pinch Here
Hairpn Clip
\
Step 4. Raise complete handle assembly until it
clicks into place. Make sure not to kinkthe
control cables.
Handle Assembly
Step 7. Attach control cables to handle with pull
ties found on the handle.
Step 8. Squeeze the blade control handle against the upper handle and pull out starter rope, slowly!
Step 9. Thread starter rope into rope gui¢ e.
Blade C _ntrol Handle
Upper Handle
Start !r Rope
Model
970-979
ly
Look Here
Rope Guide
Model
950-959