Chapter 5: Troubleshooting - Mitsubishi CS-31305 Owner's Manual

Troubleshooting (cont.)
Problems Possible Solutions
For More Information
The remote control doesn't
work.
Check that the batteries are
installed correctly.
Check that the select button
is set to "TV."
Be sure that you are point-
ing the top of the remote
control toward the TV from
a distance of no more than
20 feet.
See "Getting ready Lo use
the remote control" in
Chapter 1 for an explanation
of how to install batteries in
the reinote control.
See "Remote control buttons
and functions" in Chapter 1,
which explains where the
select buttons are located.
See "Getting ready to use
the remote control" in
Chapter 1, which contains
pointers for using the remote
control.
The TV takes several
seconds to respond to button
commands.
• Use the ENTER button te
avoid delays.
See "(',hanging channels" in
Chapter 3, which explains
the function of the ENTER
but;on.
You can't access a channel. Be sure that the channel you
want to view is programmed
into memory.
Check that the TV is tuned
to the correct input source
(antenna) for that channel.
See "Memorizing channels"
in Chapter 3, which explains
how to program channels
into tlhe TV's memory.
See "Selecting the input
source" in Chapter 3, which
explains how to change the
input source.
80 Chapter 5: Troubleshooting