Setting Up The Monitor; Attaching The Stand; Connecting Your Monitor - Dell E1911 User Manual

Back to Contents Page

Setting Up the Monitor

Dell™ E1911 monitor User's Guide
Attaching the Stand
Connecting Your Monitor
Removing the Stand Base
Attaching the Dell Soundbar (Optional)
Removing the Stand for VESA wall mount

Attaching the Stand

NOTE: The stand base is detached when the monitor is shipped from the factory.
To attach the monitor stand body to the stand base:
1. Place the monitor stand base on a stable table top.
2. Slide the monitor stand body in the correct direction down onto the stand base until it clicks into place.

Connecting Your Monitor

WARNING: Before you begin any of the procedures in this section, follow the
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
Connect the blue (VGA) cable from your monitor to your computer.
Safety Instructions.