Advertisement
our TV can automatically set
tselffor local area (or Cable
TV) channels. This makes it easy
for you to select only the TV
stations in your area when the
CH(annel) • • buttons are
pressed.
Please check and be sure the TV is
set for the type of signal you have
connected to the TV - Antenna or
Cable TV (see previous page,)
[ BEGIN
I
< J,,_,_ Press MENU • or • on the
TV (or on the remote press M
button and then M •V
buttons.)
Select the word PROGRAM with
the TV's on-screen Arrow.
¢x_
Press the (+) button (on the
I TV or the remote) to PROGRAM.
<'3,_ Press the (+) button again to
start the TV search for area
channels.
Flashing channel numbers will
count upward on the screen as the
TV looks for channels to "ADD".
You may press any button (on the
TV or remote) to stop the channel
search at any time. When the
channel search is completed the
TV will return to the last viewed
channel.
<_
Press STATUS button to clear
thescreen Gt
!Try it out. Press CHANNEL
AV buttons and see which
channels have been added.
__dro
you want to
Remember. If
p any unwanted channels
from the TV's memory, see the
next page on how to "Manually"
add and delete channels.
Note: As the TV searches for
channels to "ADD" into memory
the on-screen display may move
(or jitter slightly). This is normal
operation and does not indicate a
need for service.
".'2
JDPROGRAM
_
.
.
.....
.: :iiI:_
"RED" channel num_ii_ve
been
addedtotheTV 'sl _ ii::?_:i_i:
"w.rrE" _,_i _::_,_
•i ::::::::::::::::::::::::::
:::.
::
": :}.i.ii:.....
"
The TV .screen will be blocked off
until the .search for channels is
done.
11
Advertisement
