Advertisement
_
Press the MENU
but-
ton. The main menu appears
on the TV screen.
SETUP
EXIT
BRIGHTNESS
llllhn
24
C_p_CSiLOR
llllhn
31
TUnE
IIIIhn
31
_
Press the CH(annel)
JJv
buttons
to select
SETUP.
Then,
press
the
VOL(ume)
I_ or _1 button
to continue.
LANGUAGE
AUTO INSTALL
ANNEL EDiT
_
Press the CH(annel)
A,/Y
buttons
to select
AUTO
INSTALL.
Then,
press the
VOL(ume)
I_ or _1 button
to
enter AUTO INSTALL.,which will
set up the channels,
IOTOE
1
When setup is complete, the
SETUP menu will appear for a
moment, then the lowest stored
channel will be selected. Now,
when you press the CH(annel)
AJr
buttons, you will only scan
through channels that have been
memorized
and are available.
To
load the batteries into the
emote:
1. Slide off the battery
compartment
lid on the
bottom
of the remote
control.
2. Insert
two
AA batter-
ies (supplied)
into the
battery
compartment
as indicated inside the
compartment.
Batteries
installed incorrectly
may
damage the remote con-
trol.
3. Replace
the lid.
Battery
Compartment
Lid
ry
Compartment
I]<_
Point
the
remote
control
twOhard t_:a_enmtth:
TvswO_th_hhe
TV
I
op
g
remote.
POWER
Button
Press to turn the TV ON and OFF.
I
MENU
Button
Press to access the on-screen
menu.
Press the CH(annel)
A/•
buttons to
select an item in the menu, Press the
VOL(ume)
I_/_1
buttons to adjust an
item in the menu or to advance to the
next menu.
Number
Buttons
Press to select channels.
• Cable
Users
Enter channel numbers
as a two-digit
number for the quickest
results. For
example, to select channel 6, press 0,6.
If you only press the Number
6 button,
channel 6 will be selected after a brief
delay. (There also may be a brief delay
when you select channels 10, 11, and
12.) If you want to select channels 100
and above, enter channel numbers
as a
three-digit
number. For example, to
select channel 117, press 1, 1, 7.
• Antenna
Users
Enter channel numbers
as a two-digit
number for the quickest
results. You
may only select channels 2-69. For
example, to select channel 5, press 0,5.
If you only press the Number
5 button,
channel 5 will be selected after a brief
delay.
STATU_EX_T
E3 E3 E3
Eg E3 (Z3
Eg E3 C3
Button
Press to set the TV to turn itself OFF
automatically.
Details are on page 5.
CH(annel)
A Jr
Buttons
Press to scan through
available channel
numbers. Press to select an item in the
on-screen
menu.
-V_
I_/_1
Buttons
Press to adjust the TV sound level. Press
to adjust an item in the on-screen
menu
or to advance to the next menu.
MUTE
Button
Press to turn OFF the sound on the TV.
Press again to restore
the sound.
STATUS/EXIT
Button
Press to see the current
channel number
on the TV screen.
Press to remove
the on-screen
menu.
You also may remove the menu by press-
ing the CH(annel)
A,/V
buttons to select
EXIT, then pressing the VOL(ume)
I_/_1
buttons. (You may need to select EXIT
repeatedly to completely
remove all of
the menus.)
(Alternate
Channel)
Button
Press to return
to the TV channel you
were viewing
immediately
before switch-
ing to your current
channel.
CO
(Closed
Caption)
Button
Press repeatedly to select a Closed
Caption mode. Details are on page 7.
the POWER
button
to turn ON the TV.
Be sure to connect the TV
power cord to a standard
AC outlet.
<_
Press the VOLUME
A/•
buttons
to adjust
the sound
eve.
Press the CHAN-
NEL • /V buttons to
select available TV chan-
nels.
Sensor
_
Press the MENU
button
to display the TV's on-screen
menu.
Press the CHANNEL
•IV
buttons to select an item in the
menu.
Press the VOLUME
Air
but-
tons to adjust an item in the
menu or to advance to the next
menu.
Note:
To remove the menu,
press the CHANNEL
•/V
but-
tons to select EXIT. Then, press
the VOLUME •
or •
button.
(You may need to select EXIT
repeatedly to completely
remove
all of the menus.)
Or, press the MENU button,
repeatedly
if necessary, to
remove the MENU.
The current
Ill
channel number
will appear briefly
when the TV is first
turned ON and with
channel changes. To
display the channel
number for five sec-
onds, press the STA-
TUS/EXIT button.
You
can turn on the
TV by pressing the
CHANNEL
•/•
buttons on the front
of the TV. The
CH(annel) •/•
but-
tons of the remote
control will not turn
on the TV power.
-4-
Advertisement
