Philips 51PP9910 User Manual page 10

he MultJpoint Red/Blue Convergence
ontrols allow you to adjust picture con-
vergenceat specificpoints on the TV
screen.
Press the MENU button to
show the onscreen menu, Press
the CURSOR RIGHT button to
enter the PICTURE submenu,
Then press the CURSOR
DOWN button repeatedly until
MANUAL CONVERGE is high-
lighted,
Press the CURSOR RIGHT button to enter" the MANUAL
CONVERGE submenu. Press
the CURSOR DOWN button
repeatedly until MULTIPOINT
RED or HULTIPOINT BLUE is
highlighted. Then press the
CURSOR LEFT or RIGHT but-
ton to enter Navigate mode.
Press the CURSOR LEFT, RIGHT, UP, or DOWN but-
ton to move to a cross hair
that has a color outline. Then
press the INFO/EXIT button to
enter adjust mode.
Press the CURSOR LEFT,
RIGHT, UP, or DOWN but-
ton to adjust the cross hair
until the color outline is
gone.Then press the INFO/EXIT
button to return to NAVIGATE
mode. Repeat steps 3 and 4
until all misaligned cross hairs
have been adjusted.
For your adjustments to be
stored in the TV's memory,
you must activate SAVE
MULTIPOINT.
To save your multipoint
adjustments, press the MENU
button to return to the MANU-
AL CONVERGE menu. Press the
,i'
\, /
CURSOR DOWN button repeat-
edly until SAVE MULTIPQINT is
highlighted. Then press the CUR-
SOR LEFT or RIGHT button to
store your adjustments in the TV's
memory.
To undo the multipoint adjust-
ments you just made, highlight
UNDO MULTIPOINT and press
the CURSOR LEFT or RIGHT but-
ton,
To restore the TV's conver-
gence to factory settings, high-
light RESTORE FACTORY and
press the CURSOR LEFT or
RIGHT button.
Press the INFO/EXlT button
to exit the menu.