Turn On The "I"V; Channel Selection; Volume Control; Mute Button - Sears 580.41068390 Series Owner's Manual

TURN ON THE lV
cH Press the PUWI:H buttoli uli thu lrolit pdliel ur
Remote Control.A Channel Number on-screen
display will a ppear inthe upper right h and cornerand
then disappear after a few seconds.
Press the button again to turn off the TV.
CHANNEL SELECTION
c_,2 Select the desired channel by using the CH + or -
button or CHANNEL SELECTION buttons (0-9). The
selected channel number will appear on-screen and
then disappear.
See AIR/CABLE selection. (See Page 12)
NOTE: CH +/- buttons and Selection Buttons will not
work properly, unless the set has been Auto
Programmed. (See Page 11)
VOLUME CONTROL
Press the VOL + button to increase the volume and
VOL - button to lower the volume until the desired
sound level is obtained.
[voL _ +1 The on-screen display will disappear after a few
[ J
secondS.
MUTE BUTTON
MUTE° Press the MUTE button to mute the sound. Then, the
MUTE message appears.
If you press the CH + or - button or REVIEW button
when MUTE is selected, the channel number and
MUTE message appear on the scre'en.
CH 12
MUTED
Press the MUTE button or VOL + or - button again to
restore the sound.
9