Move the
Push the refrigeratorsideways through the
Refrigerator
entrancedoor as shown in the right picture.
Before
Installation
[]Warning
Connecting
the Refrigerator
to a Water Source
Tools
Required
Screwdriver
Electric drill
Door replacement
Mount the doors in the reverse order of
removal after the refrigerator is brought to
the installation area.
Feed water tube installation
• Automatic
icemaker operation
needs water
pressure of 21.3-121psi(Ib/inch 2) (That
is, a 7oz. paper cup will be filled within
3 sec.).
• If water pressure does not reach the rated 21.3psi(Ib/inch 2) or below, it is necessary
to purchase a separate pressure pump
for normal
automatic
icemaking
and cool
water feed.
• Keep the total
length of the water feed tube
within
40 feet and be careful not to
bend or kink the tube. If the tube
is longer
than 40 feet, the
icemaker and water
dispenser will not operate properly.
• Install the water feed tube at a place free from heat.
Water Connection Instruction
Guide
Read all directions
carefully before you begin.
• Standard
screwdriver
• 7/16-inch
and 1/2-inch
open-end
wrenches
or two adjustable
wrenches
• 1/4-inch
nut driver
• 1/4-inch
drill bit
• Hand drill or electric
drill (properly
grounded)
Adjustable
wrenches