Adjusting 2D To 3D Depth; Switching Left And Right Images; Tuning Channels; Tuning To The Next Programmed Channel - Toshiba 58L7350U User Manual

82
Basic features

Tuning Channels

2 Select 3D > 3D Important Info.
Read through the information.
3 Press the t / u (arrow) buttons to select Yes or No and press the OK
button.

Adjusting 2D to 3D depth

With this feature, you can adjust the level of 3D depth.
Within the Menu:
1 Press the SETUP button.
2 Select 3D > 2D to 3D Depth and press the OK button.
3 Press the t / u (arrow) buttons to select either 1, 2, 3, 4, or 5, and
press the OK button.
Within the Quick menu:
1 Press the QUICK button in 2D to 3D mode.
2 Select 3D Settings > 2D to 3D Depth.
3 Press the t / u (arrow) buttons to select either 1, 2, 3, 4, or 5, and
then press the OK button.

Switching left and right images

The left and right eye shutter timing of the glasses can be swapped. If 3D
images look blurred, switch the left and right sides of the 3D image.
1 Press the QUICK button to open the Quick menu.
2 Select 3D Settings > Left and Right Image and press the OK
button.
3 Press the p / q (arrow) buttons to select Swapped.
Tuning Channels

Tuning to the next programmed channel

Press the CH p / q buttons on the remote control or TV control panel.

Tuning to a specific channel (programmed or unprogrammed)

Channel: Description:
Analog Use the 0–9 buttons on the remote control. (For example, to select channel
125, press 1, 2, 5.), and then press the OK button.
Digital Use the 0–9 buttons on the remote control to enter the major channel
number. (and press the DASH button if needed, (For example, to select
digital channel 125- 1, press 1, 2, 5, –, 1.)), and then press the OK button.