How To Dismantle Parts - LG LSC 26945SW User Manual

Freezer
Compartment
Lamp
Dispenser Lamp
Freezer
Compartment
Shelf
Door Rack and
Support
Ice Storage Bin
After Dispenser
Is Used
How to Dismantle Parts
Separatethe lamp by pulling it out ® while
slightlystrikingd) and rotating ® the lamp cover.
Turnthe bulb counterclockwise.Max.40 W bulb
for refrigerator is used and can be purchased at
a service center.
Seperate the lamp by pulling it out, and then
remove the lamp. Max. 15 W bulb for
refrigerator is used and can be purchased at a
service center.
To remove a shelf, lift the left part of the shelf
a bit, push it to the direction @,lift the right part
to the direction ®, and take it out.
Lift the door rack holding both sides (b and
pull it out to ® direction.
Lift the ice shelf as shown in the right figure
@ and pull it out ®.
Hold the ice storage bin as shown in the right
figure and pull it out ® while slightly lifting it ®.
• It is recommended not to dismantle the ice
storage bin unless it is necessary.
• Use both hands to remove the ice bin to avoid
dropping it.
• If the ice bin does not slide into place easily,
twist the drive device slightly.
The water collector has no self-draining
function. It should be cleaned regularly.
Remove the cover by pulling the front side of
water collector cover and dry it with a cloth.