Canceling A Cycle; Changing A Cycle Orsetting; Adding Items During A Cycle; Option Selections - KitchenAid KUDJ01TJ Use & Care Manual

Canceling a Cycle
Anytimeduring a cycle, press
CANCEL/DRAIN glows. The dishwasher starts a 2 minute drain (if
needed). Let the dishwasher drain completely. The light goes off
when the dishwasher finishes the drain.
To stop the drain
You con press Cancai/Drain again to stop the drain immediately.
Remember to drain the dishwasher before starting a new cycle.
To dear the k_lcators
PressCsocol/Drainbefore startingthe dishwasherto clear all
optionsand cycles.
Changing a Cycle or Setting
During the flint minute of a cycle
Press a new cycle and/or options.
After the rmstminute of a cyde
1. Press
CANCEL/DRAIN glows. The dishwasher starts a 2 minute
drain (if needed). Let the dishwasher drain completely.
2. Check the detergent dispensers. If the main wash cup has
opened and the detergent washed away, refill the cops as
needed.
3. Close the door.
4. Press a new cycle and/or options.
5. Press START.
Adding Items During a Cycle
You con add an item anytime before the main wash starts. Open
the door and check the dets_gent dispenser. If the cover is still
closed, you can add items.
To add items
1. Uft up the door latch to atop the cycle. Wait for the spraying
action to stop before opening the door.
2. Open the door. If the detergent dispenser cover is still closed,
add the item.
3. Close the door firmly until it latches. The dishwasher resumes
the cycle after about a 5 second pause.
Option Selections
You con customize your cycles by pressing an option. If you
change your mind, press the option again to turn the option off.
Select a different option it desired.
You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option
any time before drying begins.
Press START to repeat the same cycle and options as the
previous wash cycle.
NOTE: If the last cycle you completed was a dose cycle, when
you press Start, the dishwasher runs the last full wash cycle and
options.
Hi-Temp Sorub
Select this option to heat the water dudng parts of the cycle, and
add a dnse. Higher water temperatures and an extra dose helps
clean tough soil. Hi-Temp Scrub, with the Heavy cycle, heats the
water in the main wash and the prewash. Hi-Temp Scrub, with
the Normal cycle, raises the water temperature in the main wash.
This option adds heat, water and wash time to the cycle.
Hi-Temp
Scrub
NOTE: Hi-Temp Scrub is an optionwith the Heavyand Normal
cycles.
F.ner SaverDry
Select this option to dry dishes without heat and save energy.
Energy Saver Dry is useful when loads contain plastic dinnerware
that may be sensitive to high temperatures.
Energy
Saver
"[he dishes take longer to dry end soma spotting con occur. For
best drying, use a liquid rinse aid. Some items (such as plastics)
may need towel drying.
NOTE: Rinse Only automatically uses this option. Energy Saver
Dry is an option with all other cycles.
Control Lock
Use Control Lock to preverd your dishwasher from accidentally
being turned on. Use Cerltrci Lock, also, to prevent accidental
cycle or option changes during a cycle.
Control
Lock
When CONTROL LOCK is lit, all buttons are disabled.
11