Serial Plate Location; Product Record - Kenmore ELITE 790.4417 Series Use & Care Manual

important Safety instructions
Use Proper Pan Size. This appliance is
equipped with one or more surface units of different sizes.
Select utensils having flat bottoms large enough to cover the
surface unit. The use of undersized utensils will expose a
portion of the surface heating unit to direct contact and may
result in ignitionof clothing. Proper relationship of utensil to the
surface unit will also improve efficiency.
• Utensil Handles Should Be Turned Inward from Edges
of Cooktop and Should Not Extend Over Adjacent
Surface Units. To reduce the risk of burns, ignition of
flammable materials, and spillage due to unintentional
contact with the utensil.
• Never Leave Surface Units Unattended at a Hit Heat
Settings. Boilovers cause smoking and greasy spillovers
that may ignite, or a pan that has boiled dry may melt.
• Protective Liners. Do not use aluminum foil to line any
part of the appliance. Only use aluminum foil as
recommended for baking if used as a cover placed on the
food. Any other use of protective liners or aluminum foil
may result in a risk of electric shock or fire or short circuit.
• Glazed Cooking Utensils. Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for range top service without breaking
due to the sudden change in temperature. Check the
manufacturer's recommendations for cooktop use.
, Ventilating hood. The ventilating hood above your
cooking surface should be cleaned frequently, so the
grease from cooking vapors does not accumulate on the
hood or filter.
= Do Not Use Decorative Surface Element Covers. if an
element is accidentally turned on, the decorative cover will
become hot and possibly melt. Burns will occur if the hot
covers are touched. Damage may also be done to the
appliance.
FOR GLASS COOKTOP ONLY
= Do Not Clean or Operate a Broken Cooktop. If cooktop
should break, cleaning solutions and spillovers may
penetrate the broken cooktop and create a risk of electric
shock. Contact a qualified technician immediately.
= Clean Cooktop with Caution. If a wet sponge or cloth is
used to wipe spills on a hot cooking area, be careful to
avoid a steam burn. Some cleaners can produce harmful
fumes if applied to a hot surface.
• Do Not Place Hot Cookware on Cold Cooktop Glass.
This could cause glass to break.
= Do not slide pans across the cooktop surface. They may
scratch the cooktop surface.
= Do not let pans boil dry. Pans that boil dry may
permanently damage the cooktop by breaking, fusing to, or
marking it. (This type of damage is not covered by your
warranty).
IMPORTANT SAFETY NOTICE
The California Safe Drinking Water and Toxic
Enforcement Act requires the Governor of California to
publish a list of substances known to the state to cause
cancer, birth defects or other productive harm, and
requires businesses to warn customers of potential
exposure to such substances.
Serial Plate Location
You will find the model and serial number printed on
the serial plate. The serial plate is located under the
cooktop.
Please see the illustration for exact location.
Remember to record the serial number for future
reference (See Product Record above).
Serial plate is
located under the
burner box.
Product Record
in this space below, record the date of purchase, model and serial number of your product. You will find the model and
serial number printed on the serial plate. This serial plate is located under the cooktop. See bottom of this page for the
serial plate location.
Model No. 790.
Serial No.
Date of purchase
Save these instructions and your sales receipt for future reference.