On main roads, the distance to an exit calculated by the Navman may be further than the distance shown on road signs. Road signs show the distance to the start of an exit while your Navman shows the distance to the next intersection, i.e., the end of the exit ramp or road.
Page 4
B2+ Traffic Module Introduction Thank you for purchasing the Navman B2+ traffic module. The B2+ can be plugged into your Navman to identify potential traffic delays in your area and help you avoid them. Use this manual to learn how...
Page 5
(Events screen) Tap (All/Route) to toggle between displaying All events, or only events on your Route. Note: The route filter is not available when you are in Free Driving mode, in this mode your Navman will display all events. (Events screen) Tap...
Page 6
Between - the locations where the event begins and ends. In the case of an event on a motorway, this would indicate the affected junctions. Age - the time elapsed since your Navman first received news of the event. Distance - your current distance from the event.
Next time you start your Navman, messages will be received from the preferred (default) station again. (Station Tuning screen) Tap Set Preferred choose a station Note: When no preferred station is set, your Navman always searches for the station with the strongest signals. Tap Clear, to clear the preferred station.
B2+ Traffic Module Traffic and other TMC Events Each TMC Event is sorted in to one of nine categories. When an Event is received, one of the following icons will display: Event Avoided Message Type Event Description Event There is a dangerous situation on the route; for example, Danger people are on the road.
You will find a fully searchable Frequently Asked Questions (FAQs) section for all Navman products. At least 90% of our customers find answers to their questions at support.navman.com, however if you require further support, you can use the online email option to contact us.