Table of Contents
Advertisement
Taking Pictures
Follow the steps below to take pictures with the flash.
1
Turn the camera and flash unit on.
2
Choose a flash mode.
Choose a flash mode as described on page 70.
Position the flash head.
3
Rotate the flash head so that it points
directly ahead.
Take pictures.
4
Before shooting, confirm that the flash
status indicator on the rear of the flash
unit is lit and that the flash-ready indi-
cator (N) appears in the camera dis-
play. To take pictures without the
flash, turn the flash unit off.
A
See Also
See page 157 for information on flash control, or page 158 for informa-
tion on adjusting flash level.
Flash status indicator
Capture-illuminator
status indicator
t
73
Advertisement
Table of Contents
